SCLT3-8BT8 Protected digital input termination with serialized state transfer
The SCLT3-8BT8 provides an 8-line protected digital input termination with serialized state transfer. This device enhances the I/O module density by cutting the dissipation (78 mW per input) and reducing the count of opto-transistors. An adjustable digital filter and an LED driver are embedded in each type 3 input section. Its 2 MHz SPI peripheral output serializes the input state transfer to the I/O module controller
技术特性
- 8-input circuit in common ground low side topology
- Wide range input DC voltage VI: -30 V to 35 V
- On state threshold : < 11 V with RI= 2.2 kΩ
- Off state threshold: Iin> 1.5 mA or Vi> 5 V
- Protected against -30 V reverse polarity
- 2.35 mA active current limiter with 10% tolerance
- Drastic dissipation reduction:78 mW max. per input
- Input digital filter with adjustable delay:20 μs to 3 ms
- Energy-less LED visual status driver
- Input logic state transfer through a 2 MHz SPI
- Programmable 8 / 16-bit register length
- Multi SCLT connection in daisy chain
- Chip temperature OTA and under voltage UVA alarms
- Multi parity bits and power loss detection with stop bits
- Drastic reduction of isolated coupler count and I/O of the field bus ASIC
- Power supply and input protection, RI= 2.2 kΩ:
- IEC 61000-4-4 transient burst : ± 4 kV minimum
- IEC 61000-4-5 voltage surge: ± 1 kV minimum
- IEC 61000-4-2 ESD: ± 8 kV in contact:± 15 kV in air minimum
- Wide range power supply voltage VC:
- + 9 V to + 35 V with 10 mA output current
- Protected against -30 V reverse polarity
|
应用领域
- Digital inputs for programmable logic controller
and decentralized I/O modules
- Digital input with serialized state transfer
- Enabling digital inputs to meet type 1 and 3
characteristics of IEC 61131-2
- EN60947-5-2 2-wire proximity sensor
compatibility
功能框图
|
SCLT3-8BT8 订购信息
订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
SCLT3-8BT8 |
Active |
3.752 |
1000 |
HTSSOP38 |
Tube |
|
SCLT3-8BT8 |
DATASHEET
描述 |
版本 |
大小 |
SCLT3-8BT8 : DS5978: Protected digital input termination with serialized state transfer |
4 |
684KB |
APPLICATION NOTES
描述 |
版本 |
大小 |
AN3031: SCLT3-8 input termination demonstration board STEVAL-IFP007V1 |
1 |
1353KB |
AN2846: SCLT3-8 - guidelines for use in industrial automation applications |
1 |
1049KB |
BOARDS AND TOOLS
描述 |
描述 |
STEVAL-IFP007V1 |
16-bit PLC digital input card demonstration board based on the SCLT3 |
FLYERS
描述 |
版本 |
大小 |
FLDIGIN1209 : Current-limiting terminations for automation digital inputs |
1.0 |
401KB |