SPV1020 Interleaved DC-DC boost converter with built-in MPPT algorithm
The SPV1020 is a monolithic 4-phase interleaved DC-DC boost converter designed to maximize the power generated by photovoltaic panels independent of temperature and amount of solar radiation.
Optimization of the power conversion is obtained with embedded logic which performs the MPPT (max. power point tracking) algorithm on the PV cells connected to the converter.
One or more converters can be housed in the connection box of the PV panels, replacing the bypass diodes. As the maximum power point is locally computed, the efficiency at system level is higher than that of conventional topologies, where the MPP is computed in the main centralized inverter.
For a cost effective application solution and to minimize size, the SPV1020 embeds power MOSFETs for active switches and synchronous rectifiers, minimizing the number of external devices. In addition, the 4-phase interleaved topology of the DC-DC converter obviates the need to use electrolytic capacitors, which may severely limit system lifetime.
The SPV1020 operates at fixed frequency in PWM mode, where the duty cycle is controlled by the embedded logic running a Perturb&Observe MPPT algorithm. The switching frequency, internally generated and set by default at 100 kHz, is externally adjustable from 50 kHz to 200 kHz, while the duty cycle can range from 5% to 90% with a step of 0.2%.
The safety of the application is guaranteed by stopping the drivers in the case of output overvoltage or overtemperature.
Multiple SPV1020s can be used in a panel array with one SPV1020 per panel. Panels can be connected in series, in parallel, or series/parallel combinations
技术特性
|
应用领域
功能框图 |
SPV1020 订购信息
| 订购型号 | 产品状态 | 美金价格 | 数量 | 封装 | 包装形式 | 温度范围 | 材料声明 |
| SPV1020 | Active | 1000 | PowerSSO 36 | Tube | –40 °C to 125 °C | SPV1020 |
DATASHEET
| 描述 | 版本 | 大小 |
| SPV1020 : DS6854: Interleaved DC-DC boost converter with built-in MPPT algorithm | 4 | 322KB |
APPLICATION NOTES
| 描述 | 版本 | 大小 |
| AN3971: STEVAL-ISV005V2: solar battery charger for lead acid batteries based on the SPV1020 and SEA05 | 1 | 1575KB |
| AN3392: Designing with the SPV1020, an interleaved boost converter with MPPT algorithm | 1 | 5701KB |
PRODUCT PRESENTATIONS
| 描述 | 版本 | 大小 |
| ST products and solutions for solar energy.pdf | 1.0.0 | 2136KB |
BOARDS AND TOOLS
| 型号 | 描述 |
| STEVAL-ISV004V2 | 240 W PV converter for photovoltaic panels based on the SPV1020 |
| STEVAL-ISV009V1 | 300 W photovoltaic converter demonstration board based on the SPV1020 |
| STEVAL-ISV008V1 | 300 W PV converter demonstration board to be integrated into a photovoltaic panel based on the SPV1020 |
| STEVAL-ISV005V2 | 240 W photovoltaic battery charger based on the SPV1020 |
FLYERS
| 描述 | 版本 | 大小 |
| FLSPV10200111: SPV1020 Solar boost converter | 1.0.0 | 369KB |
