STDP2600 DisplayPort, HDMI and component input receiver
The STDP2600 is a highly integrated, receiver IC that converts DisplayPort (DP), HDMI,
and component video input signals into TTL format targeted for TV, Monitor, and projector
applications. It has an HDMI receiver, a high speed triple ADC, and a DisplayPort receiver.
The DisplayPort receiver decodes and separates the audio-video signal from the encrypted
digital stream. The DP link comprises four main lanes and one auxiliary channel with total
available link bandwidth of 10.8 Gbps. The DP link bandwidth can be freely traded between
video resolution, refresh rate, and pixel bit depth. The auxiliary channel is a 1 MBPS
bidirectional, half-duplex, dedicated for link management and host-specific information
exchange, such as EDID, MCCS, and CP.
The HDMI receiver is version 1.3 compliant and supports all HD formats with HDCP 1.3
authentication. The analog interface includes triple 10-bit ADC, PLL, clamp control,
programmable offset gain control, and Instant Auto block optimized for capturing PC
graphics signals. This device also includes analog audio inputs for direct connection with
conventional analog AV sources.
The STDP2600 can handle full HD video @60 Hz or PC graphics up to WUXGA resolution
@60 Hz with 10/8-bit pixel depth. The decoded video data is converted to LVTTL form and
sent out on a 30-bit TTL bus with data configured as one pixel per clock or two pixels per
clock (dual data rate). The extracted audio data is transmitted on multi-channel I2S or single
wire SPDIF bus depending on audio type. The video color format conversion (RGB to YUV
and YUV to RGB) and sample structure conversion (4:4:4 to 4:2:2 and 4:2:2 to 4:4:4) offers
flexible interfacing with external video processing devices.
技术特性
- DisplayPort® (dual mode) transmitter
- HDMI/DVI operation with level translator
- HDMI 1.4 receiver
- Link rate up to 2.97 Gbps/data pair
- Color depth up to 48 bits
- SPDIF audio output
- HDCP repeater with embedded keys
- I²C to AUX bridge for EDID/MCCS pass through
- Device configuration options
- Spread spectrum on DisplayPort interface for EMI reduction
- Deep color support
- RGB/YCC (4:4:4) – 16-bit color
- YCC (4:2:2/4:2:0) – 16-bit color
- Color space conversion – YUV to RGB and RGB to YUV
- Bandwidth
- Video resolution up to 4K x 2K @ 30 Hz; 1920 x 1080 @ 120 Hz
- Audio 7.1 Ch up to 192 kHz sample rate
- Low power operation; active 500 mW, standby 25 mW
- Package
- Power supply voltages
|
应用领域
- Audio-video accessory (dongle) for
PC/notebooks and docking stations
功能框图
 |
STDP2600 订购信息
| 订购型号 |
产品状态 |
美金价格 |
数量 |
封装 |
包装形式 |
温度范围 |
材料声明 |
| STDP2600-AB |
Target |
|
|
LFBGA 8X8X1.4 81 F9X9 P0.8 B0.5 |
Tray |
|
STDP2600-AB |
| STDP2600 |
Proposal |
|
|
|
|
|
STDP2600 |
| STDP2600-AC |
Target |
|
|
LFBGA 8X8X1.4 81 F9X9 P0.8 B0.5 |
Tray |
|
STDP2600-AC |
DATA BRIEF
| 描述 |
版本 |
大小 |
| STDP2600 :DB1668: Advanced HDMI to DisplayPort (dual mode) converter |
1 |
208KB |
FLYERS
