These 8-bit latches feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. The devices are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
The eight latches are D-type transparent latches. When the latch-enable (LE) input is high, the Q outputs follow the data (D) inputs. When LE is taken low, the Q outputs are latched at the logic levels set up at the D inputs.
A buffered output-enable (OE)\ input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or the high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly
| SN54AC373-SP | |
| Voltage Nodes(V) | 5 |
| Rating | Military |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SNJ54ABT373FK | ACTIVE | -55 to 125 | 9.75 | 1ku | LCCC (FK) | 20 | 1 | TUBE | |
| SNJ54ABT373J | ACTIVE | -55 to 125 | 5.95 | 1ku | CDIP (J) | 20 | 1 | TUBE | |
| SNJ54ABT373W | ACTIVE | -55 to 125 | 9.75 | 1ku | CFP (W) | 20 | 1 | TUBE |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SNJ54ABT373FK | TBD | POST-PLATE | N/A for Pkg Type | SNJ54ABT373FK | SNJ54ABT373FK |
| SNJ54ABT373J | TBD | A42 | N/A for Pkg Type | SNJ54ABT373J | SNJ54ABT373J |
| SNJ54ABT373W | TBD | Call TI | N/A for Pkg Type | SNJ54ABT373W | SNJ54ABT373W |
