
These octal bus transceivers are designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
When the output-enable (OE)\ is low, the device passes noninverted data from the A bus to the B bus or from the B bus to the A bus, depending upon the logic level at the direction-control (DIR) input. A high on (OE)\ disables the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, (OE)\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
| SN54ACT245-SP | |
| Voltage Nodes (V) | 5 |
| Vcc range (V) | 4.5 to 5.5 |
| Input Level | TTL |
| Output Level | CMOS |
| No. of Outputs | 8 |
| Logic | True |
| Rating | Space |
| Technology Family | ACT |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| 5962-8766301SRA | ACTIVE | -55 to 125 | 56.95 | 100u | CDIP (J) | 20 | 1 | TUBE | |
| 5962-8766301SSA | ACTIVE | -55 to 125 | 98.05 | 100u | CFP (W) | 20 | 1 | TUBE |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| 5962-8766301SRA | TBD | A42 | N/A for Pkg Type | 5962-8766301SRA | 5962-8766301SRA |
| 5962-8766301SSA | TBD | Call TI | N/A for Pkg Type | 5962-8766301SSA | 5962-8766301SSA |