The 'ACT16952 are 16-bit registered transceivers that contain two sets of D-type flip-flops for temporary storage of data flowing in either direction. They can be used as two 8-bit transceivers or one 16-bit transceiver. Data on the A or B bus is stored in registers on the low-to-high transition of the clock (CLKAB or CLKBA) input, provided that the clock-enable ( or ) input is low. Taking the output-enable ( or ) input low accesses the data on either port. To avoid false clocking of the flip-flops, (or ) should not be switched from low to high while CLKAB (or CLKBA) is low.
The 74ACT16952 is packaged in TI's shrink small-outline package, which provides twice the I/O pin count and functionality of standard small-outline packages in the same printed-circuit-board area
74ACT16952 | |
Voltage Nodes(V) | 5 |
Vcc range(V) | 4.5 to 5.5 |
Output Level | CMOS |
No. of Outputs | 16 |
Static Current | 0.08 |
Technology Family | ACT |
Rating | Catalog |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
74ACT16952DL | ACTIVE | -40 to 85 | 12.85 | 1ku | SSOP (DL) | 56 | 20 | TUBE | ACT16952 |
74ACT16952DLR | ACTIVE | -40 to 85 | 10.70 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R | ACT16952 |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
74ACT16952DL | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | 74ACT16952DL | 74ACT16952DL |
74ACT16952DLR | Pb-Free (RoHS) | CU NIPDAU | N/A for Pkg Type | 74ACT16952DLR | 74ACT16952DLR |