The 'ABT16374A are 16-bit edge-triggered D-type flip-flops with 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing buffer registers, I/O ports, bidirectional bus drivers, and working registers.
These devices can be used as two 8-bit flip-flops or one 16-bit flip-flop. On the positive transition of the clock (CLK) input, the Q outputs of the flip-flop take on the logic levels set up at the data (D) inputs.
A buffered output-enable (OE\) input can be used to place the eight outputs in either a normal logic state (high or low logic levels) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly
| SN74ABT16374A | |
| Voltage Nodes(V) | 5 |
| Rating | Catalog |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74ABT16374ADGGR | ACTIVE | -40 to 85 | 2.86 | 1ku | TSSOP (DGG) | 48 | 2000 | LARGE T&R | |
| SN74ABT16374ADL | ACTIVE | -40 to 85 | 2.86 | 1ku | SSOP (DL) | 48 | 20 | TUBE | |
| SN74ABT16374ADLG4 | ACTIVE | -40 to 85 | 2.86 | 1ku | SSOP (DL) | 48 | 20 | TUBE | |
| SN74ABT16374ADLR | ACTIVE | -40 to 85 | 2.86 | 1ku | SSOP (DL) | 48 | 1000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74ABT16374ADGGR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16374ADGGR | SN74ABT16374ADGGR |
| SN74ABT16374ADL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16374ADL | SN74ABT16374ADL |
| SN74ABT16374ADLG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16374ADLG4 | SN74ABT16374ADLG4 |
| SN74ABT16374ADLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16374ADLR | SN74ABT16374ADLR |
