These 20-bit flip-flops feature 3-state outputs designed specifically for driving highly capacitive or relatively low-impedance loads. They are particularly suitable for implementing wider buffer registers, I/O ports, bidirectional bus drivers with parity, and working registers.
The 'ABT16821 can be used as two 10-bit flip-flops or one 20-bit flip-flop. The 20 flip-flops are edge-triggered D-type flip-flops. On the positive transition of the clock (CLK) input, the device provides true data at the Q outputs.
A buffered output-enable () input can be used to place the ten outputs in either a normal logic state (high or low logic level) or a high-impedance state. In the high-impedance state, the outputs neither load nor drive the bus lines significantly
SN74ABT16821 | |
Voltage Nodes(V) | 5 |
Rating | Catalog |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74ABT16821DGGR | ACTIVE | -40 to 85 | 2.86 | 1ku | TSSOP (DGG) | 56 | 2000 | LARGE T&R | |
SN74ABT16821DL | ACTIVE | -40 to 85 | 2.86 | 1ku | SSOP (DL) | 56 | 20 | TUBE | |
SN74ABT16821DLG4 | ACTIVE | -40 to 85 | 2.86 | 1ku | SSOP (DL) | 56 | 20 | TUBE | |
SN74ABT16821DLR | ACTIVE | -40 to 85 | 2.86 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74ABT16821DGGR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16821DGGR | SN74ABT16821DGGR |
SN74ABT16821DL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16821DL | SN74ABT16821DL |
SN74ABT16821DLG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16821DLG4 | SN74ABT16821DLG4 |
SN74ABT16821DLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ABT16821DLR | SN74ABT16821DLR |