The SN74AC245 octal bus transceiver is designed for asynchronous two-way communication between data buses. The control-function implementation minimizes external timing requirements.
When the output-enable (OE)\ is low, the device passes noninverted data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction control (DIR) input. A high on OE\ disables the device so that the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
| SN74AC245-EP | |
| Voltage Nodes (V) | 5, 3.3 |
| Vcc range (V) | 2.0 to 6.0 |
| Input Level | CMOS |
| Output Level | CMOS |
| Output Drive (mA) | -24/24 |
| No. of Outputs | 8 |
| Logic | True |
| Static Current | 0.004 |
| tpd max (ns) | 7 |
| Rating | HiRel Enhanced Product |
| Technology Family | AC |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74AC245IDWREP | ACTIVE | -40 to 85 | 0.56 | 1ku | SOIC (DW) | 20 | 2000 | LARGE T&R | |
| V62/04760-01XE | ACTIVE | -40 to 85 | 0.56 | 1ku | SOIC (DW) | 20 | 2000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74AC245IDWREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74AC245IDWREP | SN74AC245IDWREP |
| V62/04760-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/04760-01XE | V62/04760-01XE |