This octal bus transceiver is designed for 1.65-V to 3.6-V VCC operation.
The SN74ALVC245 is designed for asynchronous communication between data buses. The device transmits data from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE)\ input can be used to disable the device so the buses are effectively isolated.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
SN74ALVC245 | |
Voltage Nodes(V) | 5 |
Rating | Catalog |
Technology Family | ALVC |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74ALVC245NSR | ACTIVE | 0 to 70 | 7.95 | 1ku | SO (NS) | 20 | 2000 | LARGE T&R | |
SN74ALVC245NSRE4 | ACTIVE | 0 to 70 | 7.95 | 1ku | SO (NS) | 20 | 2000 | LARGE T&R | |
SN74ALVC245NSRG4 | ACTIVE | 0 to 70 | 7.95 | 1ku | SO (NS) | 20 | 2000 | LARGE T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74ALVC245NSR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ALVC245NSR | SN74ALVC245NSR |
SN74ALVC245NSRE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ALVC245NSRE4 | SN74ALVC245NSRE4 |
SN74ALVC245NSRG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74ALVC245NSRG4 | SN74ALVC245NSRG4 |