This octal buffer/line driver is designed for 2-V to 5.5-V VCC operation.
The SN74LV244A-EP is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The device is organized as two 4-bit line drivers with separate output-enable (OE) inputs. When OE is low, the device passes data from the A inputs to the Y outputs. When OE is high, the outputs are in the high-impedance state.
To ensure the high-impedance state during power up or power down, OE should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver.
This device is fully specified for partial-power-down applications using Ioff. The Ioff circuitry disables the outputs, preventing damaging current backflow through the devices when they are powered down
| SN74LV244A-EP | |
| Voltage Nodes (V) | 5/3.3/2.5 |
| Vcc range (V) | 2 to 5.5 |
| Output Drive (Max) (mA) | 0.05 |
| tpd max (ns) | 8.5 |
| Rating | HiRel Enhanced Product |
| Technology Family | LV-A |
| 器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74LV244AMDWREP | ACTIVE | -55 to 125 | 0.90 | 1ku | SOIC (DW) | 20 | 2000 | LARGE T&R | |
| V62/06604-01XE | ACTIVE | -55 to 125 | 0.90 | 1ku | SOIC (DW) | 20 | 2000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74LV244AMDWREP | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LV244AMDWREP | SN74LV244AMDWREP |
| V62/06604-01XE | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | V62/06604-01XE | V62/06604-01XE |