This 16-bit registered transceiver is designed for 1.65-V to 3.6-V VCC operation.
The SN74LVCH16952A contains two sets of D-type flip-flops for temporary storage of data flowing in either direction. The device can be used as two 8-bit transceivers or one 16-bit transceiver. Data on the A or B bus is stored in the registers on the low-to-high transition of the clock (CLKAB or CLKBA) input, provided that the clock-enable (CEAB\ or CEBA\) input is low. Taking the output-enable (OEAB\ or OEBA\) input low accesses the data on either port.
To ensure the high-impedance state during power up or power down, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver
SN74LVCH16952A | |
Voltage Nodes(V) | 3.3, 2.7, 2.5, 1.8 |
Vcc range(V) | 2.0 to 3.6 |
Output Level | LVTTL |
No. of Outputs | 16 |
Static Current | 0.02 |
th(ns) | TTL/CMOS |
Technology Family | LVC |
Rating | Catalog |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74LVCH16952ADL | ACTIVE | -40 to 85 | 1.43 | 1ku | SSOP (DL) | 56 | 20 | TUBE | |
SN74LVCH16952ADLR | ACTIVE | -40 to 85 | 1.43 | 1ku | SSOP (DL) | 56 | 1000 | LARGE T&R |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74LVCH16952ADL | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCH16952ADL | SN74LVCH16952ADL |
SN74LVCH16952ADLR | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVCH16952ADLR | SN74LVCH16952ADLR |