SN74LVTH125-EP 具有三态输出的增强型产品 3.3V Abt 四路总线缓冲器

This bus buffer is designed specifically for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.

The SN74LVTH125 features independent line drivers with 3-state outputs. Each output is in the high-impedance state when the associated output-enable (OE)\ input is high.

Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.

When VCC is between 0 and 1.5 V, the device is in the high-impedance state during power up or power down. However, to ensure the high-impedance state above 1.5 V, OE\ should be tied to VCC through a pullup resistor; the minimum value of the resistor is determined by the current-sinking capability of the driver

	SN74LVTH125-EP
Voltage Nodes (V)	3.3, 2.7
Vcc range (V)	2.7 to 3.6
Logic	True
Input Level	TTL
Output Level	CMOS
Output Drive (mA)	-32/64
No. of Gates	4
No. of Outputs	4
tpd max (ns)	3.9
Static Current	7
Rating	HiRel Enhanced Product
Technology Family	LVT

SN74LVTH125-EP 特性

Controlled Baseline
- One Assembly/Test Site, One Fabrication Site
Enhanced Diminishing Manufacturing Sources (DMS) Support
Enhanced Product-Change Notification
Qualification Pedigree
Supports Mixed-Mode Signal Operation (5-V Input and Output Voltages With 3.3-V VCC)
Supports Unregulated Battery Operation Down to 2.7 V
Typical VOLP (Output Ground Bounce) <0.8 V at VCC = 3.3 V, TA = 25°C
Ioff and Power-Up 3-State Support Hot Insertion
Bus Hold on Data Inputs Eliminates the Need for External Pullup/Pulldown Resistors
Latch-Up Performance Exceeds 500 mA Per JESD 17
ESD Protection Exceeds JESD 22
- 2000-V Human-Body Model (A114-A)
- 200-V Machine Model (A115-A)

SN74LVTH125-EP 芯片订购指南

器件	状态	温度	价格（美元）	封装 \| 引脚	封装数量 \| 封装载体	丝印标记
SN74LVTH125IPWREP	ACTIVE	-40 to 85	0.26 \| 1ku	TSSOP (PW) \| 14	2000 \| LARGE T&R
V62/04671-01XE	ACTIVE	-40 to 85	0.26 \| 1ku	TSSOP (PW) \| 14	2000 \| LARGE T&R

SN74LVTH125-EP 应用手册

标题	类型	大小
Shelf-Life Evaluation of Lead-Free Component Finishes	PDF	1310
Understanding and Interpreting Standard-Logic Data Sheets	PDF	857
TI IBIS File Creation, Validation, and Distribution Processes	PDF	380
16-Bit Widebus Logic Families in 56-Ball, 0.65-mm Pitch Very Thin Fine-Pitch BGA	PDF	895
Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices	PDF	209
LVT-to-LVTH Conversion	PDF	84
LVT Family Characteristics	PDF	98
Implications of Slow or Floating CMOS Inputs	PDF	101
Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs	PDF	105
Live Insertion	PDF	150
Input and Output Characteristics of Digital Integrated Circuits	PDF	1708
Understanding Advanced Bus-Interface Products Design Guide	PDF	253

SN74LVTH125-EP 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
SN74LVTH125IPWREP	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-1-260C-UNLIM	SN74LVTH125IPWREP	SN74LVTH125IPWREP
V62/04671-01XE	Green (RoHS & no Sb/Br)	CU NIPDAU	Level-1-260C-UNLIM	V62/04671-01XE	V62/04671-01XE