The SN74LVTH16245A is a 16-bit (dual-octal) noninverting 3-state transceiver designed for low-voltage (3.3-V) VCC operation, but with the capability to provide a TTL interface to a 5-V system environment.
This device can be used as two 8-bit transceivers or one 16-bit transceiver. It allows data transmission from the A bus to the B bus or from the B bus to the A bus, depending on the logic level at the direction-control (DIR) input. The output-enable (OE) input can be used to disable the devices so that the buses are isolated.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with bus-hold circuitry is not recommended
| SN74LVTH16245A-Q1 | |
| Voltage Nodes(V) | 3.3, 2.7 |
| Vcc range(V) | 2.7 to 3.6 |
| Input Level | TTL/CMOS |
| Output Level | LVTTL |
| Output Drive(mA) | -24/24 |
| No. of Outputs | 16 |
| Logic | True |
| Static Current | 5 |
| tpd max(ns) | 4.5 |
| Rating | Automotive |
| Technology Family | LVT |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| CLVTH16245AQDGGRQ1 | ACTIVE | 0 to 70 | 1.55 | 1ku | TSSOP (DGG) | 48 | 2000 | LARGE T&R |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| CLVTH16245AQDGGRQ1 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | CLVTH16245AQDGGRQ1 | CLVTH16245AQDGGRQ1 |
