These octal buffers/drivers are designed specifically for low-voltage (3.3-V) VCC operation, with the capability to provide a TTL interface to a 5-V system environment.
The ’LVTH241 devices are organized as two 4-bit line drivers with separate output-enable (1OE\, 2OE) inputs. When 1OE\ is low or 2OE is high, the devices pass noninverted data from the A inputs to the Y outputs. When 1OE\ is high or 2OE is low, the outputs are in the high-impedance state.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended.
When VCC is between 0 and 1.5 V, the devices are in the high-impedance state during power up or power down.
SN74LVTH241 | |
Voltage Nodes(V) | 3.3, 2.7 |
Vcc range(V) | 2.7 to 3.6 |
Logic | True |
Input Level | TTL/CMOS |
Output Level | LVTTL |
Output Drive(mA) | -32/+64 |
No. of Outputs | 8 |
Static Current | 5 |
Rating | Catalog |
Technology Family | LVT |
器件 | 状态 | 温度 | 价格(美元) | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
SN74LVTH241DW | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | LVTH241 |
SN74LVTH241DWE4 | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | LVTH241 |
SN74LVTH241DWG4 | ACTIVE | -40 to 85 | 0.60 | 1ku | SOIC (DW) | 20 | 25 | TUBE | LVTH241 |
器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
SN74LVTH241DW | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH241DW | SN74LVTH241DW |
SN74LVTH241DWE4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH241DWE4 | SN74LVTH241DWE4 |
SN74LVTH241DWG4 | Green (RoHS & no Sb/Br) | CU NIPDAU | Level-1-260C-UNLIM | SN74LVTH241DWG4 | SN74LVTH241DWG4 |