The SN74LVTH32244 is a 32-bit buffer and line driver designed for low-voltage (3.3-V) VCC operation, with the capability to provide a TTL interface to a 5-V system environment. This device can be used as eight 4-bit buffers, four 8-bit buffers, two 16-bit buffers, or one 32-bit buffer. The device provides true outputs and has symmetrical active-low output-enable (OE) inputs. It is designed specifically to improve both the performance and density of 3-state memory address drivers, clock drivers, and bus-oriented receivers and transmitters.
The SN74LVTH32244 is fully specified for hot-insertion applications using Ioff and power-up 3-state. The Ioff circuitry disables the outputs, preventing damaging current backflow through the device when it is powered down. The power-up 3-state circuitry places the outputs in the high-impedance state during power up and power down, which prevents driver conflict.
Active bus-hold circuitry holds unused or undriven inputs at a valid logic state. Use of pullup or pulldown resistors with the bus-hold circuitry is not recommended
| SN74LVTH32244 | |
| Voltage Nodes(V) | 3.3, 2.7 |
| Vcc range(V) | 2.7 to 3.6 |
| Logic | True |
| Input Level | TTL |
| Output Level | LVTTL |
| Output Drive(mA) | -32/64 |
| No. of Outputs | 32 |
| tpd max(ns) | 3.2 |
| Static Current | 10 |
| Rating | Catalog |
| Technology Family | LVT |
| 器件 | 状态 | 温度 | 价格（美元） | 封装 | 引脚 | 封装数量 | 封装载体 | 丝印标记 |
| SN74LVTH32244GKER | NRND | -40 to 85 | 3.90 | 1ku | LFBGA (GKE) | 96 | 1000 | LARGE T&R | HV244 |
| 器件 | 环保计划* | 铅/焊球涂层 | MSL 等级/回流焊峰 | 环保信息与无铅 (Pb-free) | DPPM / MTBF / FIT 率 |
| SN74LVTH32244GKER | TBD | SNPB | Level-2-235C-1 YEAR | SN74LVTH32244GKER | SN74LVTH32244GKER |
