ADS7881 | |
Resolution(Bits) | 12 |
Sample Rate (max) | 4MSPS |
Architecture | SAR |
Power Consumption(Typ)(mW) | 95 |
SINAD(dB) | 71.5 |
SNR(dB) | 71.5 |
SFDR(dB) | 90 |
DNL(Max)(+/-LSB) | 1 |
INL(Max)(+/-LSB) | 1 |
No Missing Codes(Bits) | 12 |
No. of Supplies | 2 |
Analog Voltage AV/DD(Min)(V) | 4.75 |
Analog Voltage AV/DD(Max)(V) | 5.25 |
Logic Voltage DV/DD(Min)(V) | 2.7 |
Logic Voltage DV/DD(Max)(V) | 5.25 |
Input Configuration Range | Vref |
Reference Mode | Int and Ext |
Rating | Catalog |
Pin/Package | 48TQFP, 48VQFN |
# Input Channels | 1 |
Operating Temperature Range(°C) | -40 to 85 |
The ADS7881 is a 12-bit 4-MSPS A-to-D converter with 2.5-V internal reference. The device includes a capacitor based SAR A/D converter with inherent sample and hold. The device offers a 12-bit parallel interface with an additional byte mode that provides easy interface with 8-bit processors. The device has a pseudo-differential input stage.
The –IN swing of ±200 mV is useful to compensate for ground voltage mismatch between the ADC and sensor and also to cancel common-mode noise. With nap mode enabled, the device operates at lower power when used at lower conversion rates. The device is available in a 48-pin TQFP package.
器件 | 状态 | 温度 (oC) | 价格(美元) | 封装 | 引脚 |
ADS7881IPFBR | ACTIVE | -40 to 85 | 7.35 | 1ku | TQFP (PFB) | 48 |
ADS7881IPFBRG4 | ACTIVE | -40 to 85 | 7.35 | 1ku | TQFP (PFB) | 48 |
ADS7881IPFBT | ACTIVE | -40 to 85 | 8.10 | 1ku | TQFP (PFB) | 48 |
ADS7881IPFBTG4 | ACTIVE | -40 to 85 | 8.10 | 1ku | TQFP (PFB) | 48 |
ADS7881IRGZR | ACTIVE | -40 to 85 | 7.35 | 1ku | VQFN (RGZ) | 48 |
ADS7881IRGZRG4 | ACTIVE | -40 to 85 | 7.35 | 1ku | VQFN (RGZ) | 48 |
ADS7881IRGZT | ACTIVE | -40 to 85 | 8.10 | 1ku | VQFN (RGZ) | 48 |
ADS7881IRGZTG4 | ACTIVE | -40 to 85 | 8.10 | 1ku | VQFN (RGZ) | 48 |