LM2902KV 四路运算放大器，电压增强型
These devices consist of four independent high-gain frequency-compensated operational amplifiers that are designed specifically to operate from a single supply over a wide range of voltages. Operation from split supplies also is possible if the difference between the two supplies is 3 V to 32 V (3 V to 26 V for the LM2902), and VCC is at least 1.5 V more positive than the input common-mode voltage. The low supply-current drain is independent of the magnitude of the supply voltage.
Applications include transducer amplifiers, dc amplification blocks, and all the conventional operational-amplifier circuits that now can be more easily implemented in single-supply-voltage systems. For example, the LM124 can be operated directly from the standard 5-V supply that is used in digital systems and provides the required interface electronics, without requiring additional ±15-V supplies
|
LM2902KV |
| Iq per channel(Max)(mA) |
0.3 |
| VIO (25 deg C)(Max)(mV) |
7 |
| CMRR(Min)(dB) |
60 |
| Vn at 1kHz(Typ)(nV/rtHz) |
35 |
| IIB(Max)(pA) |
250000 |
| Slew Rate(Typ)(V/us) |
0.5 |
| GBW(Typ)(MHz) |
1.2 |
| Spec'd at Vs(V) |
5 |
| VIO (Full Range)(Max)(mV) |
10 |
| Vs(Min)(V) |
3 |
| Vs(Max)(V) |
26 |
| Pin/Package |
14SOIC, 14TSSOP |
| Vio(Max)(mV) |
10 |
| Supply Voltage 5(V) |
Yes |
| Open Loop Gain(Min)(dB) |
100 |
| IQ Per Amp (+/-)(Max)(mA) |
0.3 |
| Offset Voltage (+/-)(Max)(mV) |
7 |
| Number of Channels |
2 |
| Approx. Price (US$) |
0.22 | 1ku |
| Operating Temperature Range(C) |
-40 to 125 |
| Total Supply Voltage (V)(Min)(+5V=5, +/-5V=10) |
3 |
| Total Supply Voltage (V)(Max)(+5V=5, +/-5V=10) |
26 |
LM2902KV 特性
- 2-kV ESD Protection for:
- LM224K, LM224KA
- LM324K, LM324KA
- LM2902K, LM2902KV, LM2902KAV
- Wide Supply Ranges
- Single Supply . . . 3 V to 32 V (26 V for LM2902)
- Dual Supplies . . . ±1.5 V to ±16 V (±13 V for LM2902)
- Low Supply-Current Drain Independent of Supply Voltage . . . 0.8 mA Typ
- Common-Mode Input Voltage Range Includes Ground, Allowing Direct Sensing Near Ground
- Low Input Bias and Offset Parameters
- Input Offset Voltage . . . 3 mV Typ
A Versions . . . 2 mV Typ
- Input Offset Current . . . 2 nA Typ
- Input Bias Current . . . 20 nA Typ
A Versions . . . 15 nA Typ
- Differential Input Voltage Range Equal to Maximum-Rated Supply Voltage . . . 32 V (26 V for LM2902)
- Open-Loop Differential Voltage Amplification . . . 100 V/mV Typ
- Internal Frequency Compensation
LM2902KV 芯片订购指南
| 器件 |
状态 |
温度 |
价格（美元） |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| LM2902KVQDR |
ACTIVE |
-40 to 125 |
0.22 | 1ku |
SOIC (D) | 14 |
2500 | LARGE T&R |
|
| LM2902KVQDRG4 |
ACTIVE |
-40 to 125 |
0.22 | 1ku |
SOIC (D) | 14 |
2500 |
|
| LM2902KVQPWR |
ACTIVE |
-40 to 125 |
0.22 | 1ku |
TSSOP (PW) | 14 |
2000 | LARGE T&R |
|
| LM2902KVQPWRG4 |
ACTIVE |
-40 to 125 |
0.22 | 1ku |
TSSOP (PW) | 14 |
2000 |
|
LM2902KV 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| LM2902KVQDR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
LM2902KVQDR |
LM2902KVQDR |
| LM2902KVQDRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
LM2902KVQDRG4 |
LM2902KVQDRG4 |
| LM2902KVQPWR |
TBD |
CU NIPDAU |
Level-1-260C-UNLIM |
LM2902KVQPWR |
LM2902KVQPWR |
| LM2902KVQPWRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-1-260C-UNLIM |
LM2902KVQPWRG4 |
LM2902KVQPWRG4 |
LM2902KV 应用技术支持与电子电路设计开发资源下载
- LM2902KV 数据资料 dataSheet 下载.PDF
- TI 德州仪标准线性放大器产品选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
- 在 PSPICE 中使用德州仪器 (TI) SPICE 模型 (zhca088.HTM, 8 KB)
- PowerPAD™ Thermally Enhanced Package (slma002g.HTM, 8 KB)
- 运算放大器的单电源操作 (PDF 2174 KB)
- Tuning in Amplifiers (PDF 44 KB)
- Op Amp Performance Analysis (PDF 76 KB)
- An Error Analysis of the ISO102 in a Small Signal Measuring Application (PDF 29 KB)
- Level Shifting Signals with Differential Amplifiers (PDF 23 KB)
- Operational Amplifier Macromodels: A Comparison (PDF 59 KB)
