LM359 双路、高速、可编程、电流模式 (Norton) 放大器
The LM359 consists of two current differencing (Norton) input amplifiers. Design emphasis has been placed on obtaining high frequency performance and providing user programmable amplifier operating characteristics. Each amplifier is broadbanded to provide a high gain bandwidth product, fast slew rate and stable operation for an inverting closed loop gain of 10 or greater. Pins for additional external frequency compensation are provided. The amplifiers are designed to operate from a single supply and can accommodate input common-mode voltages greater than the supply.
|
LM359 |
Vn at 1kHz (Typ) (nV/rtHz) |
6 |
IIB (Max) (pA) |
30000000 |
Slew Rate (Typ) (V/us) |
60 |
GBW (Typ) (MHz) |
400 |
Number of Channels |
2 |
Total Supply Voltage (V) (Min) (+5V=5, +/-5V=10) |
5 |
Total Supply Voltage (V) (Max) (+5V=5, +/-5V=10) |
22 |
Output Current (+/-) (Min) (A) |
6 |
Input OutputType |
Not Rail to Rail |
Special Features |
Adj BW, Adj Is |
LM359 特性
- User programmable gain bandwidth product, slew rate, input bias current, output stage biasing current and total device power dissipation
- High gain bandwidth product (ISET = 0.5 mA) 400 MHz for AV = 10 to 100 30 MHz for AV = 1
- High slew rate (ISET = 0.5 mA) 60 V/µs for AV = 10 to 100 30 V/µs for AV = 1
- Current differencing inputs allow high common-mode input voltages
- Operates from a single 5V to 22V supply
- Large inverting amplifier output swing, 2 mV to VCC - 2V
- Low spot noise
LM359 器件用途
- General purpose video amplifiers
- High frequency, high Q active filters
- Photo-diode amplifiers
- Wide frequency range waveform generation circuits
- All LM3900 AC applications work to much higher frequencies
LM359 应用技术支持与电子电路设计开发资源下载
- LM359 数据资料 dataSheet 下载.PDF
- TI 德州仪器放大器产品选型与价格 . xls
- Application Note 263 Sine Wave Generation Techniques (snoa665b.PDF, 349 KB)
- Effect of Heavy Loads on Accuracy & Linearity of Op Amp Circuits (snoa471a.PDF, 4.53 MB)