RF-HDT-AJLS Tag-it™ HF-I 标准感应器芯片（晶圆、凸块、在磁带上标记、磨削、锯动）

The Tag-it HF-I Pro Transponder IC is part of the TI 13.56 MHz product family, which is based on the ISO/IEC 15693 standard for contactless integrated circuit cards (vicinity cards) and ISO/IEC 18000-3 standard for item management. The Tag-it HF-I Pro Transponder IC builds the basis for various available inlay shapes, which are used as consumable smart labels in markets requiring quick and accurate identification of items.

User data is written to and read from memory blocks using a non-volatile EEPROM silicon technology. Each block is separately programmable by the user and can be locked to protect data from modification. Once the data has been ‘locked’ it can only be changed by the password protected write command

	RF-HDT-AJLS
Standard	ISO15693 ISO18000-3
Frequency	13.56MHz
Factory Programmed Read Only Number (bits)	64
User programmable Memory (bits)	256
Output Impedance (pF)	23.5
Die Processing	bumped, grinded and sawed
Minimum Antenna Input Voltage @ ftx (Volts)	2.5
Anticollision	Yes
Data Retention Time (Years)	10
Chip Thickness (micrometers)	150
Operating Temperature Range (°C)	-25 to 70
Storage Temperature (°C)	-40 to 85

RF-HDT-AJLS 特性

Low-Power Full-Duplex Transponder IC
Operates With 13.56-MHz Carrier Frequency
Each IC Has a 64-Bit Factory-Programmed Unique Address (UID)

RF-HDT-AJLS 器件用途

Asset Tagging
Electronic Ticketing
Anti-Counterfeit Prevention
Building Access Badges

RF-HDT-AJLS 芯片订购指南

器件	状态	温度	价格（美元）	封装 \| 引脚	封装数量 \| 封装载体	丝印标记
RF-HDT-AJLS-G1	ACTIVE		0.10 \| 1ku	(YAA) \| 0	1

RF-HDT-AJLS 质量与无铅数据

器件	环保计划*	铅/焊球涂层	MSL 等级/回流焊峰	环保信息与无铅 (Pb-free)	DPPM / MTBF / FIT 率
RF-HDT-AJLS-G1	Green (RoHS & no Sb/Br)	AU	N/A for Pkg Type	RF-HDT-AJLS-G1	RF-HDT-AJLS-G1