TAS5715 具有扬声器均衡、双频带 DRC 和 DC 保护的 25W 立体声 I2S 音频放大器
The TAS5715 is a 25-W, efficient, digital audio-power amplifier for driving stereo bridge-tied speakers. One serial data input allows processing of up to two discrete audio channels and seamless integration to most digital audio processors and MPEG decoders. The device accepts a wide range of input data and data rates. A fully programmable data path routes these channels to the internal speaker drivers.
The TAS5715 is a slave-only device receiving all clocks from external sources. The TAS5715 operates with a PWM carrier between a 384-kHz switching rate and a 352-KHz switching rate, depending on the input sample rate. Oversampling combined with a fourth-order noise shaper provides a flat noise floor and excellent dynamic range from 20 Hz to 20 kHz
|
TAS5707 |
TAS5707A |
TAS5709A |
TAS5711 |
TAS5713 |
TAS5715 |
TAS5717 |
TAS5719 |
TAS5727 |
TAS5731 |
| Max. Power to Single-Ended Load |
|
|
|
16 |
|
|
|
|
10 |
10 |
| Max. Power to Bridge Tied Load |
20 |
21 |
20 |
21 |
21.5 |
25 |
10 |
20 |
|
20 |
| Max. Power to Parallel Bridge Tied Load |
|
|
|
42.8 |
41.5 |
50 |
|
|
|
40 |
| Min. Supported Single-Ended Load |
|
|
|
4 |
|
|
|
|
2 |
2 |
| Min. Supported Bridge Tied Load |
6 |
6 |
6 |
6 |
4 |
4 |
4 |
4 |
|
3 |
| Min. Supported Parallel Bridge Tied Load |
|
|
|
4 |
2 |
4 |
|
|
|
2 |
| Closed/Open Loop |
Open |
Open |
Open |
Open |
Open |
Open |
Open |
Open |
Open |
Open |
| Max. Number of Speaker Outputs |
2 |
2 |
2 |
3 |
2 |
2 |
2 |
2 |
|
|
| Input Type |
Digital |
Digital |
Digital |
Digital |
Digital |
Digital |
Digital |
Digital |
Digital |
Digital |
| Control Type |
Hardware,Software |
Hardware,Software |
Hardware,Software |
Software |
Software |
Software |
Software |
Software |
Software |
Software |
| Analog Supply Min [V] |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
|
| Analog Supply Max [V] |
3.6 |
3.6 |
3.6 |
3.6 |
3.6 |
3.6 |
3.6 |
3.6 |
3.6 |
|
| Digital Supply Min [V] |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
3 |
| Power Stage Supply Min (V) |
8 |
8 |
8 |
8 |
8 |
8 |
4.5 |
4.5 |
8 |
8 |
| Power Stage Supply Max (V) |
26 |
26 |
24 |
26 |
26 |
26 |
26 |
26 |
26 |
21 |
| Volume Control |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
Yes |
| Dynamic Range Control (DRC) |
Single-Band |
Single-Band |
2-Band |
2-Band |
2-Band |
2-Band |
2-Band |
2-Band |
2-Band |
2-Band |
TAS5715 特性
- Audio Input/Output
- 25-W Into an 8- Load From an 18-V Supply
- 50-W Support in PBTL Mode With 4- Load
- Wide PVDD Range, From 8 V to 26 V
- Efficient Class-D Operation Eliminates Need for Heatsinks
- Requires Only 3.3 V and PVDD
- One Serial Audio Input (Two Audio Channels)
- I2C Address Selection via PIN (Chip Select)
- Supports 8-kHz to 48-kHz Sample Rate (LJ/RJ/I2S)
- Headphone PWM Outputs
- Dedicated Pin for External Headphone-Amplifier Shutdown
- Single-Filter PBTL Support
- Audio/PWM Processing
- Independent Channel Volume Controls With 24-dB to Mute
- Independent Headphone Volume
- Programmable Two-Band Dynamic Range Control
- Up to Eight User-Programmable Biquads per Channel
- Programmable Coefficients for DRC Filters
- DC Blocking Filters and PWM DC Detect
- CRC Checksum to Detect Biquad Coefficient Corruption
TAS5715 芯片订购指南
| 器件 |
状态 |
温度 |
价格（美元） |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| TAS5715PHP |
ACTIVE |
0 to 85 |
2.50 | 1ku |
HTQFP (PHP) | 48 |
250 | JEDEC TRAY (5+1) |
|
| TAS5715PHPR |
ACTIVE |
0 to 85 |
2.25 | 1ku |
HTQFP (PHP) | 48 |
1000 | LARGE T&R |
|
TAS5715 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| TAS5715PHP |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TAS5715PHP |
TAS5715PHP |
| TAS5715PHPR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-3-260C-168 HR |
TAS5715PHPR |
TAS5715PHPR |
TAS5715 工具与软件
TAS5715 应用技术支持与电子电路设计开发资源下载
- TAS5715 数据资料 dataSheet 下载.PDF
- TI 德州仪器扬声器放大器和调制器产品选型与价格 . xls
