TUSB1310A 具有 PIPE3 和 ULPI 接口的超高速 USB 收发器
The TUSB1310A is a single port, 5.0-Gbps USB 3.0 physical layer transceiver operating off of a single reference clock provided by either a crystal or an external reference clock. The reference clock frequencies are selectable from 20, 25, 30, and 40 MHz. The TUSB1310A provides the clock to the USB controller. The use of a single reference clock allows the TUSB1310A to provide a cost effective USB 3.0 solution with few external components and a low implementation cost.
The USB controller interfaces to the TUSB1310A via a PIPE (SuperSpeed) and a ULPI (USB2.0) interface. The 16-bit PIPE operates off of a 250-MHz interface clock. The ULPI supports 8-bit operations with a 60-MHz interface clock
|
TUSB1310A |
Pin/Package |
175NFBGA |
USB Speed |
SuperSpeed |
Operating Temperature Range(C) |
-40 to 85 |
ESD HBM(kV) |
+/-0.5 |
App Proc Local Bus |
PIPE3 and ULPI |
TUSB1310A 特性
- Universal Serial Bus (USB)
- Single Port 5.0-Gbps USB 3.0 Physical Layer Transceiver
- One 5.0-Gbps SuperSpeed Connection
- One 480-Mbps HS/FS/LS Connection
- Fully Compliant with USB 3.0 Specification, Revision 1.0
- Supports 3+ Meters USB 3.0 Cable Length
- Fully Adaptive Equalizer to Optimize Receiver Sensitivity
- PIPE to Link Layer Controller
- Supports 16-Bit SDR Mode at 250 MHz
- Compliant With PHY Interface for the USB Architectures (PIPE), Version 3.0
- ULPI to Link Layer Controller
- Supports 8-Bit SDR Mode at 60 MHz
- Supports Synchronous Mode and Low Power Mode
- Compliant with UTMI+ Low Pin Interface (ULPI) Specification, Revision 1.1
- General Features
- IEEE 1149.1 JTAG Support
- IEEE 1149.6 JTAG support for the SuperSpeed Port
- Operates on a Single Reference Clock of 40 MHz
- 3.3-, 1.8-, and 1.1-V Supply Voltages
- 1.8-V PIPE and ULPI I/O
TUSB1310A 芯片订购指南
器件 |
状态 |
温度 |
价格 |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
TUSB1310AZAY |
ACTIVE |
-40 to 85 |
6.60 | 1ku |
NFBGA (ZAY) | 175 |
160 | JEDEC TRAY (5+1) |
|
TUSB1310AZAYR |
ACTIVE |
-40 to 85 |
6.00 | 1ku |
NFBGA (ZAY) | 175 |
1000 | LARGE T&R |
|
TUSB1310A 质量与无铅数据
器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
TUSB1310AZAY |
Green (RoHS & no Sb/Br) |
SNAGCU |
Level-3-260C-168 HR |
TUSB1310AZAY |
TUSB1310AZAY |
TUSB1310AZAYR |
Green (RoHS & no Sb/Br) |
SNAGCU |
Level-3-260C-168 HR |
TUSB1310AZAYR |
TUSB1310AZAYR |
TUSB1310A 应用技术支持与电子电路设计开发资源下载
- TUSB1310A 数据资料 dataSheet 下载.PDF
- TI 德州仪器USB选型与价格 . xls
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 使用数字隔离器设计隔离式 I2C 总线接口 (zhct119.PDF, 339 KB)
- 高性能SERDES及其在CPRI 接口的应用分析 (zhca076.HTM, 8 KB)
- 1Q 2011 Issue Analog Applications Journal (slyt399.PDF, 964 KB)
- 接口选择指南 (Rev. D) (PDF 2994 KB)
- Signaling Rate vs. Distance for Differential Buffers (PDF 420 KB)
- Q1 2009 Issue Analog Applications Journal (slyt319.PDF, 1.39 MB)
- Isolated RS-485 Reference Design (PDF 80 KB)
- 无铅组件涂层的保存期评估 (PDF 1305 KB)
- Analog Signal Chain Guide (8.62 MB)
- Industrial Interface IC Solutions (101 KB)
TUSB1310A 工具和软件