UC2906 铅酸线性充电管理 IC
UC2906 描述
The UC2906 series of battery charger controllers contains all of the necessary circuitry to optimally control the charge and hold cycle for sealed lead-acid batteries. These integrated circuits monitor and control both the output voltage and current of the charger through three separate charge states; a high current bulk-charge state, a controlled over-charge, and a precision float-charge, or standby, state.
Optimum charging conditions are maintained over an extended temperature range with an internal reference that tracks the nominal temperature characteristics of the lead-acid cell. A typical standby supply current requirement of only 1.6mA allows these ICs to predictably monitor ambient temperatures.
Separate voltage loop and current limit amplifiers regulate the output voltage and current levels in the charger by controlling the onboard driver
|
UC2906 |
UC3906 |
| # Series Cells |
|
Multiple |
| Charge Current(Max)(A) |
|
>2 |
| Charge Status Outputs |
1 |
1 |
| Control Topology |
Linear |
Linear |
| Primary Charge Termination Method |
Maximum Voltage, Minimum Current |
Maximum Voltage, Minimum Current |
| Pin/Package |
16PDIP, 20PLCC, 16SOIC |
16PDIP, 16SOIC, 20PLCC |
| Vin(Max)(V) |
40 |
40 |
UC2906 特性
- Optimum Control for Maximum Battery Capacity and Life
- Internal State Logic Provides Three Charge States
- Precision Reference Tracks Battery Requirements Over Temperature
- Controls Both Voltage and Current at Charger Output
- System Interface Functions
- Typical Standby Supply Current of only 1.6mA
UC2906 芯片订购指南
| 器件 |
状态 |
温度 (oC) |
价格（美元） |
封装 | 引脚 |
封装数量 | 封装载体 |
丝印标记 |
| UC2906DW |
ACTIVE |
-20 to 70 |
3.30 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
|
| UC2906DWG4 |
ACTIVE |
-20 to 70 |
3.30 | 1ku |
SOIC (DW) | 16 |
40 | TUBE |
|
| UC2906DWTR |
ACTIVE |
-20 to 70 |
2.75 | 1ku |
SOIC (DW) | 16 |
2000 | LARGE T&R |
|
| UC2906DWTRG4 |
ACTIVE |
-20 to 70 |
2.75 | 1ku |
SOIC (DW) | 16 |
2000 | LARGE T&R |
|
| UC2906N |
ACTIVE |
-20 to 70 |
2.75 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
| UC2906NG4 |
ACTIVE |
-20 to 70 |
2.75 | 1ku |
PDIP (N) | 16 |
25 | TUBE |
|
| UC2906Q |
ACTIVE |
-20 to 70 |
3.30 | 1ku |
PLCC (FN) | 20 |
46 | TUBE |
|
| UC2906QG3 |
ACTIVE |
-20 to 70 |
3.30 | 1ku |
PLCC (FN) | 20 |
46 | TUBE |
|
| UC2906QTR |
ACTIVE |
-20 to 70 |
2.75 | 1ku |
PLCC (FN) | 20 |
1000 | LARGE T&R |
|
| UC2906QTRG3 |
ACTIVE |
-20 to 70 |
2.75 | 1ku |
PLCC (FN) | 20 |
1000 | LARGE T&R |
|
UC2906 质量与无铅数据
| 器件 |
环保计划* |
铅/焊球涂层 |
MSL 等级/回流焊峰 |
环保信息与无铅 (Pb-free) |
DPPM / MTBF / FIT 率 |
| UC2906DW |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
UC2906DW |
UC2906DW |
| UC2906DWG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
UC2906DWG4 |
UC2906DWG4 |
| UC2906DWTR |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
UC2906DWTR |
UC2906DWTR |
| UC2906DWTRG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
Level-2-260C-1 YEAR |
UC2906DWTRG4 |
UC2906DWTRG4 |
| UC2906N |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
N/A for Pkg Type |
UC2906N |
UC2906N |
| UC2906NG4 |
Green (RoHS & no Sb/Br) |
CU NIPDAU |
N/A for Pkg Type |
UC2906NG4 |
UC2906NG4 |
| UC2906Q |
Green (RoHS & no Sb/Br) |
CU SN |
Level-2-260C-1 YEAR |
UC2906Q |
UC2906Q |
| UC2906QG3 |
Green (RoHS & no Sb/Br) |
CU SN |
Level-2-260C-1 YEAR |
UC2906QG3 |
UC2906QG3 |
| UC2906QTR |
Green (RoHS & no Sb/Br) |
CU SN |
Level-2-260C-1 YEAR |
UC2906QTR |
UC2906QTR |
| UC2906QTRG3 |
Green (RoHS & no Sb/Br) |
CU SN |
Level-2-260C-1 YEAR |
UC2906QTRG3 |
UC2906QTRG3 |
UC2906 应用技术支持与电子电路设计开发资源下载
- UC2906 数据资料 dataSheet 下载.PDF
- TI 德州仪器电池管理产品选型与价格 . xls
- 照明和显示屏电源选择指南 (PDF 1427 KB)
- QFN Layout Guidelines (PDF 1279 KB)
- 笔记本电脑指南 (Rev. A) (PDF 2774 KB)
- 全面认识开关型电源中的BUCK-BOOST功率级 (Rev. A)
(PDF 2206 KB)
- PowerPAD™ Made Easy (PDF 57 KB)
- 标准线性产品交叉参考 (Rev. D)
(PDF 1058 KB)
- 模数规格和性能特性术语表 (Rev. A) (PDF 1993 KB)
- 所选封装材料的热学和电学性质 (PDF 645 KB)
- 高速数据转换 (PDF 1967 KB)
UC2906 相关工具
