iMCU W7100A – Single Chip Microcontroller with TCP/IP and 10/100 Fast Ethernet MAC/PHY

iMCU W7100A (100 Pin Package) is 100% compatible with W7100。
W7100A is the upgraded chip by adding the functions of Memory Lock, Power Down mode and GPIO Pull-Up/Down control. For the tiny embedded device, 64QFN package type is supported。


关键特性
  • Fully software compatible with industrial standard 8051
  • Pipelined architecture 4~5 times faster than a standard 8051
  • 2 data Pointers for fast memory block processing
  • Internal 2K Byte boot ROM
  • Internal 64K Bytes Embedded Program FLASH Memory
  • Internal 256 Bytes Embedded Data FLASH Memory
  • Internal 64K Bytes SRAM
  • External 11.0592 MHz operation frequency for internal PLL logic
  • Interrupt Controller : 2 priority levels / 4 external interrupt sources / 1watchdong interrupt
  • Four 8 bit I/O Ports
  • Three timers/counters
  • Full Duplex UART
  • Programmable Watchdog Timer
  • DoCD & trade compatible debugger
  • Fully Hardwired TCP/IP Protocols
  • 8 independent hardware socket and hybrid software stack
  • Internal 32K Bytes memory for TCP/IP data communication
  • 10BaseT/100Base TX Ethernet MAC/PHY Embedded
  • Auto negotiation (Full / Half Duplex)
  • Auto MDI/MDIX
  • 3.3V operation with 5V I/O signal tolerance
  • 100LQFP Package
W7100A
W7100A-64QFN
功能框图

W5200 功能框图

技术支持与电子电路设计开发资源下载
  LANGUAGE Version 版本
Internet Embedded MCU W7100A datasheet English v.1.1.6
W7100A / W7100 integrated driver English v1.9
W7100A / W7100 Application Note Sample codes English v1.3
W7100A / W7000 Application Note Documents English 2012-06-07
[Tool & Guide] WizISP and Program guide English Ver 1.2
W7100A / W7100 Errata Sheet English Ver.1.0.0
Differences between W7100A and W7100_v1.1 English v1.1