WizFi210 Ultra Low Power “Serial to WiFi” Module
关键特性
|
产品实物图
|
功能框图
| Specifications | Description |
| Radio Protocol | IEEE 802.11b/g/n Compatible |
| Supported Data Rates | 11, 5.5, 2, 1 Mbps (IEEE 802.11b) |
| Modulation | DSSS and CCK |
| RF Operating Frequency | 2.4 - 2.497 GHz |
| Antenna Options | Chip antenna and U.FL connector for external antenna |
| Networking Protocols | UDP, TCP/IP (IPv4), DHCP, ARP, DNS, HTTP/HTTPS Client and Server(**) |
| Power Consumption (Typical) | Standby = 34.0 µA Receive = 125.0 mA Transmit = 135.0 mA |
| RF Output Power (Typical) | 8dBm ± 1dBm |
| Security Protocols | WEP, WPA/WPA2–PSK, Enterprise (EAP-FAST, EAP-TLS, EAP-TTLS, PEAP)(**) |
| I/O Interface | UART, SPI(**), I2C(*), WAKE, ALARM, GPIOs |
| Power Source | 3.3V |
| Dimensions | 32 x 23.5 x 3 mm |
(**) is supported by dedicated firmware
技术支持与电子电路设计开发资源下载
| LANGUAGE | Version 版本 | |
| WizFi210/220 QuickStartGuide(EN) V1.0 | English | 1.0 |
| WizFi210/220 Reference Schematic | English | 2011-03-25 |
| WizFi210/220 User Manual(EN) V1.11 | English | V1.11 |
| WizFi210/220 Application notes - Part 1 | English | Ver 1.1 |
| WizFi210/220 Application notes - Part 2 | English | (20120120) |
| WIZSmartScript including firmware 1.1.0.0(W) | English | 1.1.0.0 |
| WIZSmartScript including firmware 1.1.0.5(W) | English | 1.1.0.5 |
| WizFi210/220 Configuration Tool | English | 2011-11-14 |
| WizFi210/220 HW design guide | English | 2011-11-14 |
| WizFi210/220 1.1.0.3(E) firmware (supporting WPA-EAP) | English | 1.1.0.3（E） |
| WizFi210/220 1.1.0.3(SPI) firmware and SPI master sample sources | English | 1.1.0.3（SPI） |
