AT91SAM9261 32位ARM单片机
Status |
Production |
SRAM (Bytes) |
16K |
LCD Controller |
1 |
USB Host |
2xFS |
External Bus Interface |
1 |
RTC/RTT |
-/1 |
Peripheral DMA Channels |
19 |
Max. Clock Speed (MHz) |
240 |
I/O Pins |
96 |
SDRAM Interface |
1 |
NAND Flash ECC |
1/- |
Enhanced USART |
3 |
USART/DBGU |
-/1 |
SPI |
2 |
TWI |
1 |
SSC |
3 |
MCI |
1 |
USB Device |
FS |
16-bit Timers |
3 |
Period Interval Timer |
1 |
Watchdog Timer |
1 |
Power-On-Reset |
2 |
Crystal Oscillator/PLL |
2/2 |
ARM Core |
926EJ-S |
Cache Memory (Bytes) |
2x16K |
MMU/MPU |
MMU |
I/O Voltage Domain (V) |
1.8/3.3 |
In-System Programming |
Y |
Single Supply |
N |
Pb-Free Packages |
LFBGA 217 |
AT91SAM9261S 描述
The AT91SAM9261S is pin-to-pin compatible with the AT91SAM9261. Memory size available in this product is 16K bytes of SRAM and 32K bytes of ROM.
The AT91SAM9261S is a complete system-on-chip built around the ARM926EJ-S ARM Thumb
processor with an extended DSP instruction set and Jazelle Java accelerator. It achieves 210
MIPS at 190 MHz.
The AT91SAM9261S is an optimized host processor for applications with an LCD display. Its
integrated LCD controller supports BW and up to 16M color, active and passive LCD displays.
The 16 Kbyte integrated SRAM can be configured as a frame buffer minimizing the impact for
LCD refresh on the overall processor performance. The External Bus Interface incorporates controllers
for synchronous DRAM (SDRAM) and Static memories and features specific interface
circuitry for CompactFlash and NAND Flash.
The AT91SAM9261S integrates a ROM-based Boot Loader supporting code shadowing from,
for example, external DataFlash® into external SDRAM. The software controlled Power Management
Controller (PMC) keeps system power consumption to a minimum by selectively
enabling/disabling the processor and various peripherals and adjustment of the operating
frequency.
The AT91SAM9261S also benefits from the integration of a wide range of debug features including
JTAG-ICE, a dedicated UART debug channel (DBGU) and an embedded real time trace.
This enables the development and debug of all applications, especially those with real-time
constraints.
AT91SAM9261S 特性
- Incorporates the ARM926EJ-S™ ARM® Thumb® Processor
– DSP Instruction Extensions
– ARM Jazelle® Technology for Java® Acceleration
– 16 Kbyte Data Cache, 16 Kbyte Instruction Cache, Write Buffer
– 210 MIPS at 190 MHz
– Memory Management Unit
– EmbeddedICE™, Debug Communication Channel Support
– Mid-level implementation Embedded Trace Macrocell™
- Additional Embedded Memories
– 32 Kbytes of Internal ROM, Single-cycle Access at Maximum Bus Speed
– 160 Kbytes of Internal SRAM, Single-cycle Access at Maximum Processor or Bus
Speed
- External Bus Interface (EBI)
– Supports SDRAM, Static Memory, NAND Flash and CompactFlash®
- LCD Controller
– Supports Passive or Active Displays
– Up to 16-bits per Pixel in STN Color Mode
– Up to 16M Colors in TFT Mode (24-bit per Pixel), Resolution up to 2048 x 2048
- USB
– USB 2.0 Full Speed (12 Mbits per second) Host Double Port
- Dual On-chip Transceivers
- Integrated FIFOs and Dedicated DMA Channels
– USB 2.0 Full Speed (12 Mbits per second) Device Port
- On-chip Transceiver, 2 Kbyte Configurable Integrated FIFOs
- Bus Matrix
– Handles Five Masters and Five Slaves
– Boot Mode Select Option
– Remap Command
- Fully Featured System Controller (SYSC) for Efficient System Management, including
– Reset Controller, Shutdown Controller, Four 32-bit Battery Backup Registers for a
Total of 16 Bytes
– Clock Generator and Power Management Controller
– Advanced Interrupt Controller and Debug Unit
– Periodic Interval Timer, Watchdog Timer and Real-time Timer
– Three 32-bit PIO Controllers
- Reset Controller (RSTC)
– Based on Power-on Reset Cells, Reset Source Identification and Reset Output
Control
- Shutdown Controller (SHDWC)
– Programmable Shutdown Pin Control and Wake-up Circuitry
- Clock Generator (CKGR)
– 32,768 Hz Low-power Oscillator on Battery Backup Power Supply, Providing a
Permanent Slow Clock
– 3 to 20 MHz On-chip Oscillator and two PLLs
- Power Management Controller (PMC)
– Very Slow Clock Operating Mode, Software Programmable Power Optimization
Capabilities
– Four Programmable External Clock Signals
- Advanced Interrupt Controller (AIC)
– Individually Maskable, Eight-level Priority, Vectored Interrupt Sources
– Three External Interrupt Sources and One Fast Interrupt Source, Spurious Interrupt Protected
- Debug Unit (DBGU)
– 2-wire USART and support for Debug Communication Channel, Programmable ICE Access Prevention
- Periodic Interval Timer (PIT)
– 20-bit Interval Timer plus 12-bit Interval Counter
- Watchdog Timer (WDT)
– Key Protected, Programmable Only Once, Windowed 12-bit Counter, Running at Slow Clock
- Real-Time Timer (RTT)
– 32-bit Free-running Backup Counter Running at Slow Clock
- Three 32-bit Parallel Input/Output Controllers (PIO) PIOA, PIOB and PIOC
– 96 Programmable I/O Lines Multiplexed with up to Two Peripheral I/Os
– Input Change Interrupt Capability on Each I/O Line
– Individually Programmable Open-drain, Pull-up Resistor and Synchronous Output
- Nineteen Peripheral DMA (PDC) Channels
• Multimedia Card Interface (MCI)
– SDCard and MultiMediaCard™ Compliant
– Automatic Protocol Control and Fast Automatic Data Transfers with PDC, MMC and SDCard Compliant
- Three Synchronous Serial Controllers (SSC)
– Independent Clock and Frame Sync Signals for Each Receiver and Transmitter
– I²S Analog Interface Support, Time Division Multiplex Support
– High-speed Continuous Data Stream Capabilities with 32-bit Data Transfer
- Three Universal Synchronous/Asynchronous Receiver Transmitters (USART)
– Individual Baud Rate Generator, IrDA® Infrared Modulation/Demodulation
– Support for ISO7816 T0/T1 Smart Card, Hardware and Software Handshaking, RS485 Support
- Two Master/Slave Serial Peripheral Interface (SPI)
– 8- to 16-bit Programmable Data Length, Four External Peripheral Chip Selects
- One Three-channel 16-bit Timer/Counters (TC)
– Three External Clock Inputs, Two multi-purpose I/O Pins per Channel
– Double PWM Generation, Capture/Waveform Mode, Up/Down Capability
- Two-wire Interface (TWI)
– Master Mode Support, All Two-wire Atmel EEPROMs Supported
- IEEE® 1149.1 JTAG Boundary Scan on All Digital Pins
- Required Power Supplies:
– 1.08V to 1.32V for VDDCORE and VDDBU
– 3.0V to 3.6V for VDDOSC and for VDDPLL
– 2.7V to 3.6V for VDDIOP (Peripheral I/Os)
– 1.65V to 1.95V and 3.0V to 3.6V for VDDIOM (Memory I/Os)
- Available in a 217-ball LFBGA RoHS-compliant Package
AT91SAM9261S 订购型号
Ordering Code |
Package |
Package Type |
Operating Temperature Range |
AT91SAM9261S-CJ |
BGA217 |
RoHS-compliant |
Industrial (-40° C to 85° C) |
AT91SAM9261SB-CU |
BGA217 |
RoHS-compliant |
Industrial (-40° C to 85° C) |
AT91SAM9261S 应用技术支持与电子电路设计开发资源下载
- AT91SAM9261S 数据手册DataSheet 下载. PDF(完整版)
- AT91SAM9261S 数据手册DataSheet 下载. PDF(简洁版)
- ARM7TDMI 技术白皮书
- AT91SAM 系列产品选型指南(Brochure, 2 pages, revision E, updated 2/09)
Product selection guide to Atmel's AT91SAM microcontrollers that give immediate access to market-leading ARM processors.
- Atmel's ARM-based Microcontroller Excels in Real-Time (White Paper, 6 pages, revision A, updated 3/01)
Applications such as mobile communicators, PDAs, solid-state music players and internet appliances demand the best possible real-time performance. Atmel's AT91 series of ARM-based microcontrollers incorporates a number of advanced features that enhance the real-time performance of the ARM7TDMI core, making it ideal for applications of this nature.