| 芯片型号 |
描述 |
| AT73C201 |
The AT73C201 is a low-cost, high performance
fully integrated Battery and Power Management System for
Wireless Cellular Terminals. |
| AT73C202 |
The AT73C202 is a low-cost, ultra low-power,
power and battery management IC designed to interface directly
with state-of-the-art cellular phones, for example with 2.5G
GSM phones. It includes all required power supplies tailored
to be fully compatible with the sub-systems of these mobile
phone chipsets, including the RF, analog and digital (DSP,
microcontroller, memories) sections. |
| AT73C203 |
The AT73C203 is a low-cost, ultra low-power,
power and battery management IC designed to interface directly
with portable and hand-held applications built around
microprocessors requiring smart power management functions. It
includes all required power supplies tailored to be fully
compatible with the sub-systems of these datacom platforms,
including the core, peripherals, SPI control interface, SIM
interface, etc. |
| AT73C204 |
The AT73C204 provides an integrated power
management solution for the add-on features in new-generation
mobile phones. These features include a camera module, sound
system for polyphonic ringing tones, memory module for
downloaded MP3 files, Bluetooth module for cordless headset,
etc. It is suitable for any telecommunications standard:
GSM/GPRS, PDS, CDMA, CDMA2000, WCDMA or UMTS. |
| AT73C211 |
The AT73C211 is a power management device for
digital, analog, interface, and RF and backup sections of
add-on modules used as accessories in popular handheld devices
such as mobile phones, digital still cameras, PDAs and a wide
range of multimedia devices. |
| AT73C212 |
The AT73C212 Power Management Unit for
mid-level multimedia modules integrates in a single IC the
power management circuitry for camera and sound sections in
feature phones. |
| AT73C213 |
The AT73C213 is a fully integrated, low-cost
combined stereo audio DAC and audio amplifier circuit targeted
for Li-ion or Ni-Mh battery-powered devices such as mobile
phones, smartphones, PDA, DECT phones, digital still cameras
or any other type of handheld device where an audio interface
is needed. |
| AT73C214 |
The AT73C214 is a power management device
designed to supply digital, analog, interface, RF and backup
sections of generic wireless devices, in particular battery
powered applications. It also integrates LDOs to recharge
backup elements and convert voltage to the microcontroller RTC
supply level. The AT73C214 also includes a low-cost battery
charger for Li-Ion or Li-Polymer batteries. LDO and DC-to-DC
output voltages can be programmed by mask change. |
| AT73C239 |
The AT73C239 is a 4-channel Power Supply Power
Management Unit (PMU) available in a QFN 3 x 3 mm package. It
is a fully integrated, low cost, combined Power Management
device for wireless modules, GPS and WLAN devices. It
integrates four Linear Low Drop Out (LDO) Regulators, three of
which provide high-accuracy RF performance and one (LDO4) with
very low quiescent current that is supplied by an external
backup battery. The AT73C239 features a Two-wire Interface
(TWI) to increase the efficiency of the system by disabling
LDOs when not needed. |
| RE023 |
A
Low Drop Out (LDO) voltage regulator macrocell with a fixed
2.6V output voltage, rated for loads of up to 160 mA. A
typical application is radio section supply in mobile
terminals. |
| RE024 |
A
dual mode Low Drop Out (LDO) voltage regulator macrocell with
a fixed 2.8V output voltage, rated for loads of up to 160 mA
and as low as 5 mA. A typical application is radio section
supply in mobile terminals. |
| RE025 |
A
Low Drop Out (LDO) voltage regulator macrocell with
programmable 2.8V or 2.9V output voltages, rated for loads of
up to 30 mA. A typical application is radio section supply in
mobile terminals. |
| RE027 |
A
Low Drop Out (LDO) voltage regulator macrocell with a fixed
2.8V output voltage, rated for loads of up to 130 mA. A
typical application is radio section supply in mobile
terminals. |
| RE028 |
The RE028 is a Low Drop Out (LDO) voltage
regulator macrocell with a fixed 4.5V output voltage, rated
for loads up to 300 mA. It is designed to supply radio
frequency synthesizers and used as a controller for the
antenna switch. |
| RE029 |
A
dual mode Low Drop Out (LDO) voltage regulator macrocell with
a fixed 1.8V output voltage, rated for loads of up to 80 mA
and as low as 5 mA. A typical application is baseband memory
in mobile terminals. |
| RE030 |
RE030 is a dual mode Low Drop Out (LDO)
voltage regulator macrocell with programmable output voltage
ranging from 1.75V to 2.1V, rated for loads up to 180 mA in
full power mode and 5 mA in low power mode. It is designed to
be integrated with other analog cells, digital logic,
microcontrollers, DSP cores and memory blocks into
system-on-chip products. |
| RE031 |
A
dual mode Low Drop Out (LDO) voltage regulator macrocell with
a fixed 2.5V output voltage, rated for loads of up to 5 mA. A
typical application is real-time clock, backup battery supply
in mobile terminals. |
