Part Number | Data Sheet | SPICE Model | Topology | Minimum Supply Voltage (V) | Maximum Supply Voltage (V) | Maximum VOUT (V) | LED CurrentSense Voltage (mV) | LED Current (mA) | Accuracy (%) | Frequency (kHz) | Efficiency (%) | Dimming | Temperature Range (°C) | Polarity | ESD Diodes (Y/N) | BVCEO (V) Min @ Ic=1.0 mA, IB=0 | BVEBO (V) Min @ Ie=10 uA, IC=0 | ICEX (nA) Max @ VCE=30V, VBE(Off) =3.0V | IBL (nA) Max @ VCE=30V, VBE(Off) =3.0V | VCE(sat) (V) Max @ IC =10mA, IB=1.0 mA | VBE(sat) (V) Min @ IC =10mA, IB=1.0 mA | VBE(sat) (V) Max @ IC =10mA, IB=1.0 mA | VBE(on) (V) Min @ IC =2mA, VCE=1.5 V | VBE(on) (V) Max @ IC =2mA, VCE=1.5 V | hFE Min @ IC=100 uA, VCE = 1.0V | hFE Min @ IC=1 mA, VCE = 1.0V | hFE Min @ IC=10 mA, VCE = 1.0V | BVCBO (V) Min @ Ic=50uA, IE=0 | BVEBO (V) Min @ Ie=50 uA, IC=0 | ICBO (uA) Max @ VCB=30V, IE=0 | IEBO (uA) Max @ VEB=4V, IC=0 | VBE(on) (V) Min @ IC =2mA, VCE=5 V | VBE(on) (V) Max @ IC =2mA, VCE=5 V | hFE Min @ IC=150 mA, VCE = 5.0V |
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
AL5802 | AL5802.pdf | AL5802 | Linear LED Driver | 4.5 | 30 | 30 | 650 | 120 | - | - | - | PWM | -40 to +125 | NPN, NPN Pre-Biased | - | 40 | 6 | 50 | 50 | 0.2 | 0.65 | 0.85 | 0.3 | 1.1 | 40 | 70 | 100 | 30 | 5 | 0.5 | 0.5 | 0.3 | 1.1 | 100 |
The AL5802 combines a high gain NPN transistor with a prebiased NPN transistor to make a simple small footprint °C driver. The °C current is set by an external resistor connected to from REXT pin (6) to GND pin (4), the internal high gain transistor develops approximately 0.6V across the external resistor. The AL5802 open-collector output can operate from 0.8V to 30V enabling it to operate from 5V to 24V power supplies without additional components. PWM dimming of the °C current can be achieved by either driving the BIAS pin (2) with a low impedance voltage source, or driving the EN pin (3) with an external opencollector NPN transistor or open-drain N-channel MOSFET. The AL5802 is available in a SOT26 package and is ideal for driving 20mA to 120mA °C currents.