• 简体中文
• English

AP1662：离线LED 驱动器

Description

The AP1662 is an active power factor control IC which is designed mainly for use as a pre-converter in electronic ballast, AC-DC adapter and off-line SMPS applications. The IC includes an internal start-up timer for stand-alone applications, a one-quadrant multiplier to realize near unity power factor and a zero current detector to ensure DCM boundary conduction operation. The totem pole output stage is capable of driving power MOSFET with 600mA source current and 800mA sink current. Designed with advanced BiCMOS process, the AP1662 features low start-up current, low operation current and low power dissipation. The AP1662 also has rich protection features including over-voltage protection, input under-voltage lockout with hysteresis and multiplier output clamp to limit maximum peak current. The AP1662 meets IEC61000-3-2 standard even at one-quadrant load and THD lower than 10% at high-end line voltage and full load.

Application

• Electronic Ballast
• AC-DC Adapter
• Off-line SMPS
• Single Stage PFC LED Driver

Features

• Comply with IEC61000-3-2 Standard
• Proprietary Design for Minimum THD
• Zero Current Detection Control for DCM Boundary Conduction Mode
• Adjustable Output Voltage with Precise Over-voltage Protection
• Low Start-up Current with 40μA Typical Value
• Low Quiescent Current with 2.5mA Typical Value
• 1% Precision Internal Reference Voltage @ TJ=25°C
• Internal Start-up Timer
• Disable Function for Reduced Current Consumption
• Totem Pole Output with 600mA Source and 800mA Sink Current Capability
• Under-voltage Lockout with 2.5V Hysteresis

订购型号

• AP1662MTR-G1

SO-8