AP2810C：单通道USB 开关
| Part Number | Data Sheet | SPICE Model | Maximum Continuous Output Current (A) | Maximum Current Limit (A) | Enable Logic | Minimum Operating Voltage (V) | Maximum Operating Voltage (V) | Quiescent Current Typ (µA) | RDS(ON) (VIN = 5V) Typ (mΩ) | Output Discharge | OCP Output Latch Off | OCP Flag | Operating Ambient Temperature Range (°C) | UL Listed | NEMKO IEC 60950-1 CB |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| AP2810C | AP2810.pdf | - | 1 | 2.1 | Active Low | 2.7 | 5.5 | 35 | 70 | Yes | No | Yes | -40 to +85 | Pending | Pending |
Description
The AP2810 is an integrated high-side power switch that consists of N-Channel MOSFET, charge pump, over current & temperature and other related protection circuits. The switch’s low RDS (ON), 60mΩ, design easily to meet USB voltage drop requirements. It includes soft-start to limit inrush current, over-current protection, load short protection with fold-back, and thermal shutdown to avoid switch failure during hot plug-in. Under voltage lockout (UVLO) function is used to ensure the device remain off unless there is a valid input voltage present. A Flag output is available to indicate fault conditions to the local USB controller.
Application
- USB Power Management
- USB Bus/Self Powered Hubs
- Hot-plug Power Supplies
- Battery-charger Circuits
- Notebooks, Motherboard PCs
MSOP-8
SO-8
- AP2810.pdf AP2810D
