AP8801:中等电压DC-DC LED驱动器

Part NumberData SheetSPICE ModelQualified to AECQ10xPPAP CapableTopologies (Buck)Topologies (Buck-Boost)Topologies (Boost)MinimumInput Voltage (V)MaximumInput Voltage (V)Maximum Output Voltage (V)Maximum LED Current (A)LED Current Accuracy (%)Switching Frequency Maximum (kHz)Dimming (PWM)Dimming (Analog)Efficiency (%)OperatingTemperatureRange (°C)Sense Voltage (mV)AEC-Q100 Grade
AP8801AP8801.pdf---Yes--848480.57700------
Description

The AP8801 is a step-down DC/DC converter designed to drive °Cs with a constant current. The device can drive up to thirteen °Cs, depending on the forward voltage of the °Cs, in series from a voltage source of 8V to 48V. Series connection of the °Cs provides identical °C currents resulting in uniform brightness and eliminating the need for ballast resistors. The AP8801 switches at frequency up to 500kHz. This allows the use of small size external components, hence minimizing the PCB area needed. Maximum output current of AP8801 is set via an external resistor connected between the VIN and SET input pins. Dimming is achieved by applying either a DC voltage or a PWM signal at the CTRL input pin. An input voltage of 0.2V or lower at CTRL shuts down the output at SW and puts the device into a low-current standby state.

Application
  • Commercial & industrial lighting
  • Small LCD panel backlight
  • Appliances interior lighting
  • Architecture Detail lighting
Features
  • °C driving current up to 500mA
  • Operating input voltage up to 48V
  • High efficiency up to 92%
  • High switching frequency up to 500kHz
  • PWM/DC input for dimming control
  • Built-in output open-circuit protection
  • SO-8 and MSOP-8L are available in “Green” Molding Compound (No Br, Sb)
  • Lead Free Finish/RoHS Compliant
订购型号
  • AP8801EV1
  • AP8801EV2
  • AP8801M8G-13
  • AP8801SG-13
MSOP-8
SO-8
AP8801.pdf AP8801