ZABG6002:固定偏置发生器

Part NumberData SheetSPICE ModelLNA Bias StagesMixer Bias StagesLNA VDRAIN (V)LNA IDRAIN (mA)IQ (mA)VCC (V)VNEG (V)
ZABG6002ZABG6002.pdf-602151.68-2.6
Description

The ZABG6002 is a low power six stage depletion mode FET bias controller intended primarily for DBS applications. To provide flexibility two of the six bias stages can be configured to support active mixers. Designed to operate with minimal current and from a supply of 3V to 8V the ZABG6002 is well suited to low power applications.

Application

LNB

Features
  • Six stage FET bias controller, two configurable as mixer stages
  • Operates from supplies of 3.0 to 8.0V
  • Amplifier FET drain voltages set at 2.0V, mixer drain voltage set at 0.25V
  • Amplifier FET drain current selectable from 0 to 15mA, mixer current from 0 to 5mA
  • Switchable FET’s for power management
  • FET drain voltages and currents held stable over temperature and Vcc variations
  • FETs protected against overstress during power-up and power-down.
  • Internal negative supply generator allowing single supply operation (available for external use)
  • Low quiescent supply current, 1.6mA typical
  • Low external component count
订购型号
  • ZABG6002Q20TC
QSOP-20
QFN2044
ZABG6002.pdf ZABG6002
ZXBM1021 single phase variable speed motor control pre-driver ZXBM1021
ZXBM1021 single phase variable speed motor control pre-driver ZXBM1021
ZABG6002 low power 6 stage fet lna and mixer bias controller ZABG6002
ZABG6002 low power 6 stage fet lna and mixer bias controller ZABG6002