The EL5176 is a high bandwidth amplifier with an output in differential form. It is primarily targeted for applications such as driving twisted-pair lines or any application where common mode injection is likely to occur. The input signal can be in either single-ended or differential form but the output is always in differential form.
On the EL5176, two feedback inputs provide the user with the ability to set the device gain (stable at minimum gain of one).
The output common mode level is set by the reference pin (REF), which has a -3dB bandwidth of over 50MHz. Generally, this pin is grounded but it can be tied to any voltage reference.
Both outputs (OUT+, OUT-) are short-circuit protected to withstand temporary overload condition.
The EL5176 is available in the 10 Ld MSOP package and is specified for operation over the full -40°C to +85°C temperature range.
See also EL5171 (EL5176 in 8 Ld MSOP).
Key Features
- Fully differential inputs, outputs, and feedback
- 250MHz 3dB bandwidth
- 800V/µs slew rate
- Low distortion at 20MHz
- Single 5V or dual ±5V supplies
- 40mA maximum output current
- Low power - 8mA typical supply current
- Pb-free (RoHS compliant)
Applications
- Twisted-pair drivers
- Differential line drivers
- VGA over twisted-pair
- ADSL/HDSL drivers
- Single-ended to differential amplification
- Transmission of analog signals in a noisy environment
Datasheets| Title | Type | Updated | Size | Other Languages |
|---|
| EL5176 Datasheet | PDF | 16 Jul 2015 | 390 KB | |
Order Information| Part Number | Package Type | Weight(g) | Pins | MSL Rating | Peak Temp (°C) | RoHS Status |
|---|
|
| EL5176IY | 10 Ld MSOP | 0.026 | 10 | | 240 | |
|
|
| EL5176IY-T13 | 10 Ld MSOP T+R | 0.026 | 10 | | 240 | |
|
|
| EL5176IY-T7 | 10 Ld MSOP T+R | 0.026 | 10 | | 240 | |
|
|
| EL5176IYZ | 10 Ld MSOP | 0.026 | 10 | 2 | 260 | RoHS |
|
|
| EL5176IYZ-T13 | 10 Ld MSOP T+R | 0.026 | 10 | 2 | 260 | RoHS |
|
|
| EL5176IYZ-T7 | 10 Ld MSOP T+R | 0.026 | 10 | 2 | 260 | RoHS |
|
|
|
|
| EL5176IY-EVAL | | | | N/A | | |
|
|
