The HIP6004B provides complete control and protection for a DC-DC converter optimized for high-performance microprocessor applications. It is designed to drive two N-Channel MOSFETs in a synchronous-rectified buck topology. The HIP6004B integrates all of the control, output adjustment, monitoring and protection functions into a single package.
The output voltage of the converter is easily adjusted and precisely regulated. The HIP6004B includes a fully TTL-compatible 5-input digital-to-analog converter (DAC) that adjusts the output voltage from 1.3VDC to 2.05VDC in 0.05V and from 2.1VDC to 3.5VDC in 0.1V increments steps. The precision reference and voltage-mode regulator hold the selected output voltage to within ±1% over temperature and line voltage variations.
The HIP6004B provides simple, single feedback loop, voltage-mode control with fast transient response. It includes a 200kHz free-running triangle-wave oscillator that is adjustable from below 50kHz to over 1MHz. The error amplifier features a 15MHz gain-bandwidth product and 6V/µs slew rate which enables high converter bandwidth for fast transient performance. The resulting PWM duty ratio ranges from 0% to 100%.
The HIP6004B monitors the output voltage with a window comparator that tracks the DAC output and issues a Power Good signal when the output is within ±10%. The HIP6004B protects against over-current and overvoltage conditions by inhibiting PWM operation. Additional built-in overvoltage protection triggers an external SCR to crowbar the input supply. The HIP6004B monitors the current by using the rDS(ON) of the upper MOSFET which eliminates the need for a current sensing resistor.
Key Features
- Drives Two N-Channel MOSFETs
- Operates from +5V or +12V Input
- Simple Single-Loop Control Design
- Fast Transient Response
- High-Bandwidth Error Amplifier
- Full 0% to 100% Duty Ratio
- Excellent Output Voltage Regulation
- ±1% Over Line Voltage and Temperature
- TTL-Compatible 5-Bit Digital-to-Analog Output Voltage Selection
- Wide Range 1.3VDC to 3.5VDC
- 0.1V Binary Steps 2.1VDC to 3.5VDC
- 0.05V Binary Steps 1.3VDC to 2.05VDC
- Power-Good Output Voltage Monitor
- Over-Voltage and Over-Current Fault Monitors
- Does Not Require Extra Current Sensing Element, Uses MOSFET's rDS(ON)
- Small Converter Size
- Constant Frequency Operation
- 200kHz Free-Running Oscillator Programmable from 50kHz to over 1MHz
- QFN Package:
- Compliant to JEDEC PUB95 MO-220 QFN - Quad Flat No Leads - Package Outline
- Near Chip Scale Package footprint, which improves PCB efficiency and has a thinner profile
Applications
- Power Supply for Pentium®, Pentium Pro, Pentium II, PowerPC™, K6™, 6X86™ and Alpha™ Microprocessors
- High-Power 5V to 3.xV DC-DC Regulators
- Low-Voltage Distributed Power Supplies

Order InformationPart Number | Package Type | Weight(g) | Pins | MSL Rating | Peak Temp (°C) | RoHS Status |
---|
|
HIP6004BCB | 20 Ld SOIC | 0.5 | 20 | | 240 | |
|
|
HIP6004BCB-T | 20 Ld SOIC T+R | 0.5 | 20 | | 240 | |
|
|
HIP6004BCBZ | 20 Ld SOIC | 0.5 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCBZ-T | 20 Ld SOIC T+R | 0.5 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCBZA | 20 Ld SOIC | 0.5 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCBZA-T | 20 Ld SOIC T+R | 0.5 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCR | 20 Ld QFN | 0.069 | 20 | | 240 | |
|
|
HIP6004BCR-T | 20 Ld QFN T+R | 0.069 | 20 | | 240 | |
|
|
HIP6004BCRZ | 20 Ld QFN | 0.069 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCRZ-T | 20 Ld QFN T+R | 0.069 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCV | 20 Ld TSSOP | 0.072 | 20 | | 240 | |
|
|
HIP6004BCV-T | 20 Ld TSSOP T+R | 0.072 | 20 | | 240 | |
|
|
HIP6004BCVZ | 20 Ld TSSOP | 0.072 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCVZ-T | 20 Ld TSSOP T+R | 0.072 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCVZA | 20 Ld TSSOP | 0.072 | 20 | 3 | 260 | RoHS |
|
|
HIP6004BCVZA-T | 20 Ld TSSOP T+R | 0.072 | 20 | 3 | 260 | RoHS |
|
|