• 简体中文
• English

The Intersil ISL54065 device is a low ON-resistance, low voltage, bi-directional, dual single-pole/double-throw (SPDT) analog switch. It is designed to operate from a single +1.8V to +6.5V supply and pass signals that swing down to 6.5V below the positive supply rail. Targeted applications include battery powered equipment that benefit from low r_ON (0.56Ω), low power consumption (8nA) and fast switching speeds (t_ON = 55ns, t_OFF = 18ns). The digital inputs are 1.8V logic-compatible up to a +3V supply. The ISL54065 also features integrated circuitry to eliminate click and pop noise to an audio speaker.

The ISL54065 is offered in a small form factor package, alleviating board space limitations. It is available in a tiny 12 Ld 2.2x1.4mm µTQFN.

The ISL54065 is a committed dual single-pole/double-throw (SPDT) that consist of two normally open (NO) and two normally closed (NC) switches with independent logic control. This configuration can be used as a dual 2-to-1 multiplexer.

Key Features

• Pb-Free (RoHS Compliant)
• Single Supply Operation: +1.8V to +6.5V
• Negative Signal Swing (Max 6.5V Below V+)
• Enable Pin to Disable All Switches
• Integrated Click and Pop Elimination Circuitry
• Click and Pop Circuitry Disable Pin
• ON-Resistance (rON)
  • V+ = +4.5V: 0.52Ω
  • V+ = +4.3V: 0.65Ω
  • V+ = +2.7V: 0.9Ω
  • V+ = +1.8V: 1.8Ω
• rON Matching Between Channels: 10mΩ
• rON Flatness Across Signal Range: 0.33Ω
• Low THD+N @ 32Ω Load: 0.02%
• Low Power Consumption @ 3V (PD): 24nW
• Fast Switching Action (V+ = +4.3V)
  • tON: 43ns
  • tOFF: 23ns
• ESD HBM Rating: >6kV
• Guaranteed Break-Before-Make
• 1.8V Logic Compatible (+3V supply)
• Low I+ Current when VINH is not at the V+ Rail
• Available in 12 Ld 2.2mm x 1.4mm µTQFN Package

Applications

• Audio and Video Switching
• Battery powered, Handheld, and Portable Equipment
  • MP3 and Multimedia Players
  • Cellular/mobile Phones
  • Pagers
  • Laptops, Notebooks, Palmtops
• Portable Test and Measurement
• Medical Equipment