ISL78211: Automotive Single-Phase Core Regulator for IMVP-6™ CPUs

The ISL78211 is a single-phase buck regulator implementing lntel™ IMVP-6™ protocol, with embedded gate drivers. lntel™ Mobile Voltage Positioning (IMVP) is a smart voltage regulation technology effectively reducing power dissipation in lntel™ Pentium processors.

The heart of the ISL78211 is the patented R3 Technology™, Intersil’s Robust Ripple Regulator modulator. Compared with the traditional multi-phase buck regulator, the R3 Technology™ has faster transient response. This is due to the R3 modulator commanding variable switching frequency during a load transient.

The ISL78211 provides three operation modes: the Continuous Conduction Mode (CCM), the Diode Emulation Mode (DEM) and the Enhanced Diode Emulation Mode (EDEM). To boost battery life, the ISL78211 changes its operation mode based on CPU mode signals DPRSLRVR and DPRSTP#, and the FDE pin setting, to maximize the efficiency. In CPU active mode, the ISL78211 commands the CCM operation. When the CPU enters deeper sleep mode, the ISL78211 enables the DEM to maximize the efficiency at light load. Asserting the FDE pin of the ISL78211 in CPU deeper sleep mode will enable the EDEM to further decrease the switching frequency at light load and increase the regulator efficiency.

A 7-bit Digital-to-Analog Converter (DAC) allows dynamic adjustment of the core output voltage from 0.300V to 1.500V. The ISL78211 has 0.8% system voltage accuracy over entire temperature.

A unity-gain differential amplifier provides remote voltage sensing at the CPU die. This allows the voltage on the CPU die to be accurately measured and regulated per lntel™ IMVP-6 specification. Current sensing can be implemented through either lossless inductor DCR sensing or precise resistor sensing. If DCR sensing is used, an NTC thermistor network will thermally compensates the gain and the time constant variations caused by the inductor DCR change.

The ISL78211 provides the power monitor function through the PMON pin. PMON output is a high-bandwidth analog voltage signal representing the CPU instantaneous power. The power monitor function can be used by the system to optimize the overall power consumption, extending battery run time.

The ISL78211 is tested to AEC-Q100 specifications.

Key Features
  • Precision single-phase CORE voltage regulator
    • 0.5% system accuracy over -10°C to 100°C temperature range
    • 0.8% system accuracy over entire temperature range
    • Enhanced load line accuracy
  • Internal gate driver with 2A driving capability
  • Microprocessor voltage identification input
    • 7-Bit VID input
    • 0.300V to 1.500V in 12.5mV steps
    • Support VID change on-the-fly
  • Multiple current sensing schemes supported
    • Lossless inductor DCR current sensing
    • Precision resistive current sensing
  • Thermal monitor
  • Power monitor indicating CPU instantaneous power
  • User programmable switching frequency
  • Differential remote voltage sensing at CPU die
  • Overvoltage, undervoltage, and overcurrent protection
  • AEC-Q100 tested
  • Pb-free (RoHS compliant)
Typical Diagram
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL78211 DatasheetPDF10 Jul 20151.31 MB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL78211ARZ40 Ld QFN0.102402260RoHS
ISL78211ARZ-T40 Ld QFN T+R0.102402260RoHS
Datasheet
ISL78211 Datasheet 10 Jul 2015
Other
ISL78211
40 Ld QFN T+R ISL6261