ISL8126: Dual/n-Phase Buck PWM Controller with Integrated Drivers

The ISL8126 integrates two voltage-mode PWM leading-edge modulation control with input feed-forward synchronous buck PWM controllers to control dual independent voltage regulators or a 2-phase single output regulator. It also integrates current sharing control for the power module to operate in parallel, which offers high system flexibility.

The ISL8126 integrates an internal linear regulator, which generates IC’s bias voltages for applications with only one single supply rail. The internal oscillator is adjustable from 150kHz to 1.5MHz, and is able to synchronize to an external clock signal for frequency synchronization and phase paralleling applications. Its PLL circuit can output a phase-shift-programmable clock signal for the system to be expanded to 3-, 4-, 6- and 12- phases with desired interleaving phase shift.

The ISL8126’s Fault Spreading feature protects any channel from overloading/stressing due to system faults or phase failure. The undervoltage fault protection features are also designed to prevent a negative transient on the output voltage during falling down. This eliminates the Schottky diode that is used in some systems for protecting the load device from reversed output voltage damage.

Key Features
  • Wide VIN range operation: 3V to 26.5V
    • VCC operation from 3V to 5.60V
  • Excellent output voltage regulation: 0.6V internal reference
  • Frequency synchronization with programmable phase delay up to 12-phase applications
  • Fault spreading capability for high system reliability
  • Digital soft-start with precharged output start-up capability
  • Dual independent channel enable inputs with precision voltage monitor and voltage feed-forward capability
    • Programmable input voltage POR and its hysteresis with a resistor divider at EN input
  • Extensive circuit protection functions: output overvoltage, undervoltage, overcurrent protection, over-temperature and pre-power-on-reset overvoltage protection option
Applications
  • Power supply for Datacom/Telecom and POL
  • Paralleling power module
  • Wide and narrow input voltage range buck regulators
Typical Diagram
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL8126 DatasheetPDF29 Jan 20151.02 MB
Design Files
TitleTypeUpdatedSizeOther Languages
ISL8126EVAL1Z Design FilesZIP----220 KB
Tech Briefs
TitleTypeUpdatedSizeOther Languages
TB389: PCB Land Pattern and Surface Mount Guidelines for QFN PackagesPDF19 Nov 2014661 KB
User Guides
TitleTypeUpdatedSizeOther Languages
ISL8126EVAL1Z User GuidePDF13 Nov 20141.02 MB
White Papers
TitleTypeUpdatedSizeOther Languages
Five Easy Steps to Create a Multi-Load Power SolutionPDF30 Jan 2017502 KB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL8126CRZ32 Ld QFN0.07323260RoHS
ISL8126CRZ-T32 Ld QFN T+R0.07323260RoHS
ISL8126CRZ-T7A32 Ld QFN T+R0.07323260RoHS
ISL8126IRZ32 Ld QFN0.07323260RoHS
ISL8126IRZ-T32 Ld QFN T+R0.07323260RoHS
ISL8126IRZ-T7A32 Ld QFN T+R0.07323260RoHS
ISL8126IRZ-TK32 Ld QFN T+R0.07323260RoHS
ISL8126EVAL1ZN/ARoHS
Datasheet
ISL8126 Datasheet 29 Jan 2015
Other
ISL8126EVAL1Z User Guide 13 Nov 2014
ISL8126
ISL8126EVAL1Z Design Files ----
32 Ld QFN T+R ISL8112
Five Easy Steps to Create a Multi-Load Power Solution 30 Jan 2017
TB389: PCB Land Pattern and Surface Mount Guidelines for QFN Packages 19 Nov 2014