ISL95870B: PWM DC/DC Controller with VID Inputs for Portable GPU Core-Voltage Regulator

The ISL95870, ISL95870A, ISL95870B ICs are Single-Phase Synchronous-Buck PWM regulators featuring Intersil’s proprietary R4 Technology™. The wide 3.3V to 25V input voltage range is ideal for systems that run on battery orAC-adapter power sources. The ISL95870A and ISL95870B are low-cost solutions for applications requiring dynamically selected slew-rate controlled output voltages. The soft-start and dynamic setpoint slew-rates are capacitor programmed.Voltage identification logic-inputs select four (ISL95870A, ISL95870B) resistor-programmed setpoint reference voltages that directly set the output voltage of the converter between 0.5V and 1.5V, and up to 5V with a feedback voltage divider.

Compared with R3 modulator, the R4 modulator has equivalent light-load efficiency, faster transient performance, accurately regulated frequency control and all internal compensation. These updates, together with integrated MOSFET drivers and schottky bootstrap diode, allow for a high-performance regulator that is highly compact and needs few external components. The differential remote sensing for output voltage and selectable switching frequency are another two new functions. For maximum efficiency, the converter automatically enters diode-emulation mode (DEM) during light-load conditions such as system standby.

Key Features
  • Input Voltage Range: 3.3V to 25V
  • Output Voltage Range: 0.5V to 5V
  • Precision Regulation
    • Proprietary R4™ Frequency Control Loop
    • ±0.5% System Accuracy Over -10°C to +100°C
  • Optimal Transient Response
    • Intersil’s R4™ Modulator Technology
  • Output Remote Sense
  • Extremely Flexible Output Voltage Programmability
    • 2-Bit VID Selects Four Independent Setpoint Voltages for ISL95870B
    • 2-Bit VID Selects Four Dependent or Three Independent Setpoint Voltages for ISL95870A
    • Simple Resistor Programming of Setpoint Voltages
  • Selectable 300kHz, 500kHz, 600kHz or 1MHz PWM Frequency in Continuous Conduction
  • Automatic Diode Emulation Mode for Highest Efficiency
  • Power-Good Monitor for Soft-Start and Fault Detection
Applications
  • Mobile PC Graphical Processing Unit VCC Rail
  • Mobile PC I/O Controller Hub (ICH) VCC Rail
  • Mobile PC Memory Controller Hub (GMCH) VCC Rail
Typical Diagram
Application Notes
TitleTypeUpdatedSizeOther Languages
AN1652: iSim:PE Users GuidePDF13 Nov 20141.45 MB
Datasheets
TitleTypeUpdatedSizeOther Languages
ISL95870, ISL95870A, ISL95870B DatasheetPDF17 Nov 2014797 KB日本語
White Papers
TitleTypeUpdatedSizeOther Languages
Five Easy Steps to Create a Multi-Load Power SolutionPDF30 Jan 2017502 KB
Order Information
Part NumberPackage TypeWeight(g)PinsMSL RatingPeak Temp (°C)RoHS Status
ISL95870BHRZ20 Ld QFN0.0325203260RoHS
ISL95870BHRZ-T20 Ld QFN T+R0.0325203260RoHS
ISL95870BIRZ20 Ld QFN0.0325203260RoHS
ISL95870BIRZ-T20 Ld QFN T+R0.0325203260RoHS
ISL95870, ISL95870A, ISL95870B Datasheet 17 Nov 2014
ISL95870, ISL95870A, ISL95870B Datasheet 17 Nov 2014
20 Ld QFN T+R ISL95870B
ISL95870
AN1652: iSim:PE Users Guide 13 Nov 2014
Five Easy Steps to Create a Multi-Load Power Solution 30 Jan 2017