• 简体中文
• English

LTC1053 - Dual/Quad Precision Zero-Drift Operational Amplifiers With Internal Capacitors

The LTC™1051/LTC1053 are high performance, low cost dual/quad zero-drift operational amplifiers. The unique achievement of the LTC1051/LTC1053 is that they integrate on chip the sample-and-hold capacitors usually required externally by other chopper amplifiers. Further, the LTC1051/LTC1053 offer better combined overall DC and AC performance than is available from other chopper stabilized amplifiers with or without internal sample/hold capacitors.

The LTC1051/LTC1053 have an offset voltage of 0.5µV, drift of 0.01µV/°C, DC to 10Hz, input noise voltage typically 1.5µVP-P and typical voltage gain of 140dB. The slew rate of 4V/µs and gain bandwidth product of 2.5MHz are achieved with only 1mA of supply current per op amp.

Overload recover times from positive and negative saturation conditions are 1.5ms and 3ms respectively, about a 100 or more times improvement over chopper amplifiers using external capacitors.

The LTC1051 is available in an 8-lead standard plastic dual-in-line package as well as a 16-pin SW package. The LTC1053 is available in a standard 14-pin plastic package and an 18-pin SO. The LTC1051/LTC1053 are plug in replacements for most standard dual/quad op amps with improved performance.

特点 Dual/Quad Low Cost Precision Op Amp No External Components Required Maximum offset Voltage 5µV Maximum Offset Voltage Drift 0.05µV/°C Low Noise 1.5µVp-p (0.1Hz to 10Hz) Minimum Voltage Gain, 120dB Minimum PSRR, 120dB Minimum CMRR, 114dB Low Supply Current 1mA/Op Amp Single Supply Operation 4.75V to 16V Input Common Mode Range Includes Ground Output Swings to Ground Typical Overload Recovery Time 3ms Pin Compatible with Industry Standard Dual and Quad Op Amps 典型应用

应用 Thermocouple Amplifiers Electronic Scales Medical Instrumentation Strain Gauge Amplifiers High Resolution Data Acquistion DC Accurate R, C Active Filters 封装信息