• 简体中文
• English

MAX1290：400ksps、+5V、8/4通道、12位ADC，带有+2.5V电压基准及并行接口

尺寸最小的低功耗、并行输出、12位ADC

The MAX1290/MAX1292 low-power, 12-bit analog-to-digital converters (ADCs) feature a successive-approximation ADC, automatic power-down, fast wake-up (2µs), an on-chip clock, +2.5V internal reference, and a high-speed, byte-wide parallel interface. The devices operate with a single +5V analog supply and feature a VLOGIC pin that allows them to interface directly with a +2.7V to +5.5V digital supply. Power consumption is only 10mW (VDD = VLOGIC) at a 400ksps max sampling rate. Two software-selectable power-down modes enable the MAX1290/MAX1292 to be shut down between conversions; accessing the parallel interface returns them to normal operation. Powering down between conversions can cut supply current to under 10µA at reduced sampling rates. Both devices offer software-configurable analog inputs for unipolar/bipolar and single-ended/pseudo-differential operation. In single-ended mode, the MAX1290 has eight input channels and the MAX1292 has four input channels (four and two input channels, respectively, when in pseudo-differential mode). Excellent dynamic performance and low power, combined with ease of use and small package size, make these converters ideal for battery-powered and data-acquisition applications or for other circuits with demanding power consumption and space requirements. The MAX1290/MAX1292 tri-states active-low INT when active-low CS goes high. Refer to MAX1262/MAX1264 if tri-stating active-low INT is not desired. The MAX1290 is available in a 28-pin QSOP package, while the MAX1292 comes in a 24-pin QSOP. For pin-compatible +3V, 12-bit versions, refer to the MAX1291/MAX1293 data sheet.

关键特性 12-Bit Resolution, ±0.5 LSB Linearity +5V Single-Supply Operation User-Adjustable Logic Level (+2.7V to +5.5V) Internal +2.5V Reference Software-Configurable Analog Input Multiplexer 8-Channel Single-Ended/4-Channel Pseudo-Differential (MAX1290) 4-Channel Single-Ended/2-Channel Pseudo-Differential (MAX1292) Software-Configurable Unipolar/Bipolar Analog Inputs Low Current: 2.5mA (400ksps) 1.0mA (100ksps) 400µA (10ksps) 2µA (Shutdown) Internal 6MHz Full-Power Bandwidth Track/Hold Byte-Wide Parallel (8 + 4) Interface Small Footprint: 28-Pin QSOP (MAX1290) 24-Pin QSOP (MAX1292)

MAX1290、MAX1292：典型工作电路 应用 数据采集系统 数据记录 能量管理 工业控制系统 病人监护 触摸屏

数据手册DataSheet

关键参数

开发工具

• MAX1292EVKIT

质量和环境数据

• MAX1290.pdf

相关产品

• MAX1267：265ksps、+3V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1261：250ksps、+3V、8/4通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1268：420ksps、+5V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1262：450ksps、+5V、8/4通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX115：2x4通道、同时采样、12位ADC
• MAX1293：250ksps、+3V、8/4通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1291：250ksps、+3V、8/4通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1296：420ksps、+5V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口
• MAX1294：420ksps、+5V、6/2通道、12位ADC，带有+2.5V电压基准及并行接口

订购型号