MAX1647:与化学类型无关的电池充电控制器

SBS 2级智能电池充电器,带有SMBus接口

The MAX1647/MAX1648 provide the power control necessary to charge batteries of any chemistry. In the MAX1647, all charging functions are controlled through the Intel® System Management Bus (SMBus™) interface. The SMBus 2-wire serial interface sets the charge voltage and current, and provides thermal status information. The MAX1647 functions as a level 2 charger, compliant with the Duracell®/Intel Smart Battery Charger Specification. The MAX1648 omits the SMBus serial interface, and instead sets the charge voltage and current proportional to the voltage applied to external control pins. In addition to the feature set required for a level 2 charger, the MAX1647 generates interrupts to signal the host when power is applied to the charger or a battery is installed or removed. Additional status bits allow the host to check whether the charger has enough input voltage, and whether the voltage on or current into the battery is being regulated. This allows the host to determine when lithium-ion batteries have completed charge without interrogating the battery. The MAX1647 is available in a 20-pin SSOP with a 2mm profile height. The MAX1648 is available in a 16-pin SO package.

关键特性
  • Charges Any Battery Chemistry: Li-Ion, NiCd, NiMH, Lead Acid, etc.
  • Intel SMBus 2-Wire Serial Interface (MAX1647)
  • Intel/Duracell Level 2 Smart Battery Compliant (MAX1647)
  • 4A, 2A, or 1A Maximum Battery-Charge Current
  • 11-Bit Control of Charge Current
  • Up to 18V Battery Voltage
  • 10-Bit Control of Voltage
  • ±0.75% Voltage Accuracy with External ±0.1% Reference
  • Up to 28V Input Voltage
  • Battery Thermistor Fail-Safe Protection
MAX1647、MAX1648:引脚配置
MAX1647、MAX1648:引脚配置
应用
  • 充电站
  • 笔记本电脑
  • PDA及其它手持设备
  • 电话
数据手册DataSheet
语言下载文件备注
英文MAX1647-MAX1648.pdfRev 1; 04/2003
关键参数
Part NumberProtected VIN
(V)
Charging VIN
(V)
Charge Rate Set byMax. ICHG
(A)
Charge TerminationCharge RegulationOper. Temp.
(°C)
Package/Pins
max
MAX16472828I2C/SMBus4
  • External Control
  • Smart Battery Control
Switchmode-40 to +85SSOP/20
技术资料
质量和环境数据
订购型号
型号状况推荐替代产品封装温度RoHS/无铅
MAX1647EAP停止供货MAX1647EAP+SSOP,;20引脚;57.9mm²-40°C至+85°CRoHS/无铅:否
MAX1647EAP+生产中SSOP,;20引脚;57.9mm²-40°C至+85°CRoHS/无铅:无铅
MAX1647EAP+T生产中SSOP,;20引脚;57.9mm²-40°C至+85°CRoHS/无铅:无铅
MAX1647EAP-T停止供货MAX1647EAP+TSSOP;20引脚-40°C至+85°C参考数据资料
MAX1647-MAX1648.pdf MAX1647
New Developments in Battery Chargers MAX6023
Versatile ICs Enable Chemistry-Independent Battery Charging MAX1647
MAX1647.pdf MAX1647
MAX1647-MAX1648.pdf MAX1648