• 简体中文
• English

MAX2235：+3.6V、1W、自动斜率控制功率放大器，适用于900MHz系统

The MAX2235 low-voltage, silicon RF power amplifier (PA) is designed for use in the 900MHz frequency band. It operates directly from a single +2.7V to +5.5V supply, making it suitable for use with 3-cell NiCd or 1-cell Li-Ion batteries. The device delivers +30dBm (1W) typical output power from a +3.6V supply or +28dBm from a +2.7V supply. The MAX2235's gain is adjustable over a 37dB range. A power-control pin controls gain and bias to maintain optimum efficiency, even at lower output power levels, thus extending the operating life of the battery. At +30dBm output power, efficiency is typically 47%. An additional power-saving feature is a shutdown mode that typically reduces supply current below 1µA. A key feature of this PA is its autoramping capability. During turn-on and turn-off periods, the RF envelope is controlled to approximate a raised cosine on the rising and falling edge, thereby minimizing transient noise and spectral splatter. The ramp time is set by selecting the value of an external capacitor. The MAX2235 is intended for use in constant envelope applications such as AMPS, two-way paging, or FSK-based communications in the 900MHz ISM band. The device is available in a thermally enhanced 20-pin TSSOP package with a heat slug.

关键特性 800MHz to 1000MHz Operation High Output Power at 836MHz +32.5dBm at +5.0V +30dBm at +3.6V +29dBm at +3.0V +28dBm at +2.7V +2.7V to +5.5V Single-Supply Operation Automatic Power-Up/Power-Down Ramp Direct On/Off Keying (OOK) without Intersymbol Interference or VCO Pulling 37dB Power-Control Range 47% Efficiency < 1µA Supply Current in Shutdown Mode Small 20-Pin TSSOP Package with Heat Slug

MAX2235：典型工作电路 应用 900MHz ISM波段应用 模拟蜂窝电话 微蜂窝GSM (5类功率) 双向寻呼 无线数据网络

数据手册DataSheet

关键参数

开发工具

• MAX2235EVKIT

质量和环境数据

• MAX2235.pdf

订购型号