• 简体中文
• English

MAX381：高精度、低电压、SPST、CMOS模拟开关

The MAX381/MAX383/MAX385 are precision, low-voltage analog switches. The single-pole single-throw MAX381 and double-pole single-throw MAX385 dual switches are normally open. The single-pole double-throw MAX383 has two normally open and two normally closed poles. All three parts offer low on-resistance (less than 35Ω), guaranteed to match to within 2Ω between channels and to remain flat over the specified analog signal range (4Ω max). They also offer low leakage (less than 250pA at +25°C and less than 2.5nA at +85°C) and fast switching (turn-on time less than 175ns and turn-off time less than 100ns). The MAX381/MAX383/MAX385 are fabricated with Maxim's low-voltage silicon-gate process for high system accuracy. Design improvements guarantee extremely low charge injection (< 5pC) and low power consumption (< 10µW). These monolithic switches operate with a single positive supply (+3V to +15V) or with split supplies (±3V to ±8V) while retaining CMOS-logic input compatibility and fast switching. CMOS inputs provide reduced input loading.

关键特性 Single-Supply Operation (+3V to +15V) Bipolar-Supply Operation (±3V to ±8V) Pin-Compatible with DG401/DG403/DG405 Low On-Resistance, 20Ω Typical (35Ω Max) Guaranteed Matched On-Resistance Between Channels, < 2Ω Guaranteed Flat On-Resistance over Specified Analog Signal Range, < 4Ω Guaranteed Charge Injection, < 5pC Guaranteed Off-Channel Leakage, < 2.5nA at +85°C TTL/CMOS-Logic Compatible with 3V, 5V, ±3V, and ±5V Supplies Rail-to-Rail Analog Signal Handling Capability

MAX381、MAX383、MAX383B、MAX385：引脚配置/原理框图/真值表 应用 音频信号切换 电池供电应用 通信系统 引导与控制系统 平面显示器 军用无线装置 PBX、PABX 采样保持电路 测试设备

数据手册DataSheet

关键参数

订购型号