• 简体中文
• English

MAX4663：2.5Ω、四路、SPST、CMOS模拟开关

The MAX4661/MAX4662/MAX4663 quad analog switches feature low on-resistance of 2.5Ω max. On-resistance is matched between switches to 0.5Ω max and is flat (0.5Ω max) over the specified signal range. Each switch can handle rail-to-rail analog signals. Off-leakage current is only 5nA max at TA = +85°C. These analog switches are ideal in low-distortion applications and are the preferred solution over mechanical relays in automatic test equipment or applications where current switching is required. They have lower power requirements, use less board space, and are more reliable than mechanical relays. The MAX4661 has four normally closed (NC) switches, and the MAX4662 has four normally open (NO) switches. The MAX4663 has two NC and two NO switches, and features guaranteed break-before-make switching. These devices operate from a single +4.5V to +36V supply or from dual ±4.5V to ±20V supplies. A separate logic supply pin guarantees TTL/CMOS-logic compatibility when operating across the entire supply voltage range.

关键特性 Low On-Resistance (2.5Ω max) Guaranteed RON Match Between Channels (0.5Ω max) Guaranteed RON Flatness over Specified Signal Range (0.5Ω max) Rail-to-Rail Signal Handling Guaranteed Break-Before-Make (MAX4663) > 2kV ESD Protection per Method 3015.7 +4.5V to +36V Single-Supply Operation ±4.5V to ±20V Dual-Supply Operation TTL/CMOS-Compatible Control Inputs

MAX4661、MAX4662、MAX4663：引脚配置 应用 ADC系统 音频信号切换 航空电子 通信系统 数据采集 PBX/PABX系统 簧片继电器替代品 采样保持电路 测试设备

数据手册DataSheet

关键参数

质量和环境数据

• MAX4663.pdf

订购型号