MAX7370:8 x 8键盘开关控制器和LED驱动器/GPIO,带有I²C接口和较高的ESD保护

8 x 8键盘开关控制器,具有更高的ESD保护

The MAX7370 I²C-interfaced peripheral provides microprocessors with management of up to 64 key switches, with optional GPIO and PWM-controlled LED drivers. The key-switch drivers interface with metallic or resistive switches with on-resistances up to 5kΩ. Key inputs are monitored statically, not dynamically, to ensure low-EMI operation. The IC features autosleep and autowake modes to further minimize the power consumption of the device. The autosleep feature puts the device in a low-power state (1µA typ) after a timeout period. The autowake feature configures the device to return to normal operating mode from sleep upon a keypress. The key controller debounces and maintains a FIFO buffer of keypress and release events (including autorepeat, if enabled). An interrupt (active-low INT) output can be configured to alert keypresses, as they occur, or at the maximum rate. The same index rows and columns in the device can be used as a direct logic-level translator. If the device is not used for key-switch control, all keyboard pins can be used as GPIOs. Each GPIO can be programmed to one of the two externally applied logic voltage levels. Four column ports (COL7–COL4) can also be configured as LED drivers that feature constant-current and PWM intensity control. The maximum constant-current level for each open-drain LED port is 20mA. The intensity of the LED on each open-drain port can be individually adjusted through a 256-step PWM control. The device is offered in a 24-pin (3.5mm × 3.5mm) TQFN package with an exposed pad, and small 25-bump (2.159mm x 2.159mm) wafer-level package (WLP) for cell phones, pocket PCs, and other portable consumer electronic applications. The device operates over the -40°C to +85°C extended temperature range.

  • Monitors Up to 64 Keys
  • Integrated High-ESD Protection
    • ±8kV IEC 61000-4-2 Contact Discharge
    • ±15kV IEC 61000-4-2 Air-Gap Discharge
  • Keyscan Uses Static Matrix Monitoring for Low-EMI Operation
  • Four LED Driver Pins on COL7–COL4
  • 5V Tolerant, Open-Drain I/O Ports Capable of Constant-Current LED Drive
  • 256-Step PWM Individual LED Intensity-Control Accuracy
  • Individual LED Blink Rates and Common LED Fade In/Out Rates from 256ms to 4096ms
  • FIFO Queues Up to 16 Debounced Key Events
  • User-Configurable Keypress and Release Debounce Time (2ms to 32ms)
  • Key-Switch Interrupt (active-low INT) on Each Debounced Event/FIFO Level, or End-of-Definable Time Period
  • 1.62V to 3.6V Operating Supply Voltage
  • Individually Programmable GPIOs to Two Logic Levels
  • 8-Channel Individual Programmable Level Translators
  • Provides Optional GPIOs on all ROW_ and COL_ Pins
  • Supports Hot Insertion
  • 400kbps, 5.5V Tolerant I²C Serial Interface with Selectable Bus Timeout
MAX7370:Functional Block Diagram
MAX7370:Functional Block Diagram
  • 蜂窝电话
  • 手持式游戏机
  • 笔记本电脑
  • PDA
  • 便携式消费类电子
英文MAX7370.pdfRev 2; 08/2015
Part NumberInterfaceKeysI2C I/F Volt.ISUPPLY
Interr. OutKey Scan I2C Slave IDsGPIOVSUPPLY
maxtyptypSee Notes
  • I2C 100kbit/400kbit
  • Serial 2-Wire 400kbit
641.6 to 3.6351.5Yes416 GPIO1.62 to 3.6
  • TQFN-CU/24
  • WLP/25
$1.21 @1k
MAX7370.pdf MAX7370
MAX7370.pdf MAX7370
MAX7370.pdf MAX7370
MAX7370.pdf MAX7370
MAX7370.pdf MAX7370