KSZ8862
The KSZ8862M is 2-port switch with fiber support, available in 8-/16-bit and 32-bit bus designs.
The KSZ8862M is an industry first, fully managed, 2-port switch. It is based on a proven, 4th generation, integrated Layer-2 switch, compliant with IEEE 802.3u standards.
For industrial applications, the KSZ8862M can run in half-duplex mode regardless of the application. In fiber mode, port 1 can be configurable to either 100BASE-FX or 100BASE-SX/10BASE-FL. The LED driver and post amplifier are also included for 10Base-FL and 100Base-SX applications.
In copper mode, port 2 supports 10/100BASE-T/TX with HP Auto MDI/MDI-X for reliable detection of and correction for straight-through and crossover cables.
Microchip's proprietary LinkMD® Time Domain Reflectometry (TDR) based function is also available for determining the cable length, as well as cable diagnostics for identifying faulty cabling.
The KSZ8862M offers an extensive feature set that includes tag/port-based VLAN, quality of service (QoS) priority management, management information base (MIB) counters, and CPU control/data interfaces to effectively address Fast Ethernet applications.
The KSZ8862M contains:
- Two 10/100 transceivers with patented, mixed-signal, low-power technology
- Two media access control (MAC) units
- Direct memory access (DMA) channel
- High-speed, non-blocking, switch fabric
- Dedicated 1K entry forwarding table
- On-chip frame buffer memory
When using the provided KSZ8462 software driver, please exclude the 1588 PTP code at compile time.
Microchip's complimentary and confidential LANCheck® online design review service is available for customers who have selected our products for their application design-in. The is subject to Microchip's and requires a myMicrochip account.
产品特性- Non-blocking switch fabric assures fast packet delivery by utilizing a 1K entry forwarding table and a store-and-forward architecture
- Fully compliant with IEEE 802.3u standards
- Full-duplex IEEE 802.3x flow control (Pause) with force mode option
- Half-duplex back pressure flow control
- IEEE 802.1Q VLAN support for up to 16 groups (full range of VLAN IDs)
- VLAN ID tag/untag options, on a per port basis
- IEEE 802.1p/Q tag insertion or removal on a per port basis (egress)
- Programmable rate limiting at the ingress and egress ports
- Broadcast storm protection
- IEEE 802.1d spanning tree protocol support
- MAC filtering function to filter or forward unknown unicast packets
- Direct forwarding mode enabling the processor to identify the ingress port and to specify the egress port
- Internet Group Management Protocol (IGMP) v1/v2 snooping support for multicast packet filtering
- IPV6 Multicast Listener Discovery (MLD) snooping support
- Integrated LED driver and post amplifier for 10BASE-FL and 100BASE-SX optical modules
- 100BASE-FX/SX and 10BASE-FL fiber support on port 1
- Port mirroring/monitoring/sniffing: ingress and/or egress traffic to any port
- MIB counters for fully compliant statistics gathering - 34 MIB counters per port
- Loopback modes for remote failure diagnostics
- Control registers configurable on-the-fly (port-priority, 802.1p/d/Q)
- Per port, 802.1p and DiffServ-based
- Remapping of 802.1p priority field on a per port basis
- Full-chip hardware power-down (register configuration not saved) allows low power dissipation
- Per port-based, software power-save on PHY (idle link detection, register configuration preserved)
- Single power supply: 3.3V
- Commercial Temperature Range: 0°C to +70°C
- Industrial Temperature Range: –40°C to +85°C
- (see Ordering Information).
- Available in 128-pin PQFP
- Available in -16 version for 8/16-bit bus support and -32 version for 32-bit bus support (see Ordering Information).
| 技术参数
Parameter Name
Value
| Value |
Description
2-Port 10/100 Ethernet Switch with Generic Interface
|
2-Port 10/100 Ethernet Switch with Generic Interface
|
Ethernet Bandwidth
10Base-T/100Base-TX/FX
|
10Base-T/100Base-TX/FX
|
MAC
3
|
3
|
PHY
2
|
2
|
TX/RX RAM Buffer(Bytes)
4KB
|
4KB
|
Interrupt Pin
Yes
|
Yes
|
LEDs
8
|
8
|
Op. Voltage (V)
3.3
|
3.3
|
# Ethernet Ports
2
|
2
|
Interface
8-/16-Bit
|
8-/16-Bit
|
Temp. Range Min. (°C)
-40
|
-40
|
Temp. Range Max. (°C)
70
|
70
|
# of Ports
2
|
2
|
Host Interface
8-/16-Bit
|
8-/16-Bit
|
Automotive
Yes
|
Yes
|
# of Ether Ports
2
|
2
|
Managed
Yes
|
Yes
|
Copper Support
10/100
|
10/100
|
Fiber Support
100 FL/SX/FX
|
100 FL/SX/FX
|
8/16-bit
Yes
|
Yes
|
Supply Voltage (V)
3.3
|
3.3
|
Internal LDO
Yes
|
Yes
|
Vdd I/O (V)
3.3
|
3.3
|
LinkMD Cable Diag
Yes
|
Yes
|
Pin-Pin With
n/a
|
n/a
|
ESD Rating (KV)
n/a
|
n/a
|
Smart Power Adjust
n/a
|
n/a
|
Largest Pkt-Size Bytes
1916
|
1916
|
IPV6
Yes
|
Yes
|
# of VLAN
16
|
16
|
Flow Ctrl
Yes
|
Yes
|
Rate Limiting
Yes
|
Yes
|
Static MAC Addr
Yes
|
Yes
|
|
文档资料
KSZ8862-16/32MQL - 2-Port Ethernet Switch with Non-PCI Interface and Fiber Suppo | Data Sheets | 11/09/2015 | 817KB | |
|
AN2157 - Transient Protection in Power Over Ethernet Applications | AppNote | 05/24/2016 | 229KB | |
Micrel AN 109 - Unmanaged Ethernet Redundant Ring | AppNote | 10/02/2015 | 67KB | |
Micrel AN 114 - Virtual LAN | AppNote | 10/02/2015 | 85KB | |
Micrel AN 24 - Ethernet over POF | AppNote | 10/01/2015 | 149KB | |
Micrel AN 25 - EtherSynch - Synchronization Perfected | AppNote | 10/01/2015 | 267KB | |
Micrel AN 27 - Fast Ethernet: Delivery of Data in Industrial Applications | AppNote | 10/01/2015 | 108KB | |
Micrel AN 31 - General PCB Design and Layout Guidelines | AppNote | 10/01/2015 | 104KB | |
Micrel AN 32 - Get in Sync! | AppNote | 10/01/2015 | 1432KB | |
Micrel AN 44 - Interfacing Fast Ethernet to Processors | AppNote | 10/01/2015 | 149KB | |
Micrel AN 45 - Interfacing Fast Ethernet Transceivers to MAC Processors | AppNote | 10/01/2015 | 122KB | |
Micrel AN 8 - Capacitive Coupling Ethernet Transceivers without Using Transformers | AppNote | 09/30/2015 | 103KB | |
Micrel AN 81 - PHY Speed and Duplex Configuration | AppNote | 10/02/2015 | 132KB | |
Micrel AN 84 - Programmable Guide and Supporting Software for KSZ88xxM Generic Bus Interface | AppNote | 10/02/2015 | 80KB | |
Micrel AN 91 - Reducing Maintenance Costs With Cable Diagnosis and Micrels LinkMD | AppNote | 10/02/2015 | 420KB | |
|
Driver is located in Linux Kernel | Software Library | 02/01/2016 | | |
|
KSZ8862M_V1.1_DP_100B-FX.zip | Design Guides | 02/19/2016 | 27372KB | |
KSZ8862M_V1.1_DP_10B-FL.zip | Design Guides | 02/19/2016 | 26890KB | |
订购型号
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|
KSZ8862-16MQL-FX | 128 | PQFP | 0C to +70C | TRAY | 16.30 | 13.58 | 12.35 | 11.41 | 10.82 |
KSZ8862-32MQL | 128 | PQFP | 0C to +70C | TRAY | 23.60 | 19.66 | 17.88 | 16.52 | 15.67 |
相类似产品
Product | Ethernet Bandwidth | Interface | Price5K |
---|
KSZ8462 | 10Base-T/100Base-TX/FX | 8-/16-Bit | $7.53 |
KSZ8463 | 10Base-T/100Base-TX/FX | MII/RMII | $3.76 |
KSZ8765 | 10Base-T/100Base-TX/100Base-FX | GMII/RGMII/MII/RMII | $6.44 |
KSZ8775 | 10Base-T/100Base-TX | RGMII/MII/RMII | $3.25 |
KSZ8794 | 10Base-T/100Base-TX | RGMII/MII/RMII | $3.09 |
KSZ8795 | 10Base-T/100Base-TX | GMII/RGMII/MII/RMII | $3.20 |
KSZ8841 | 10Base-T/100Base-TX | | $5.36 |
KSZ8842 | 10Base-T/100Base-TX | PCI/32-/16-/8-bit | $7.73 |
KSZ8852 | 10Base-T/100Base-TX | 8-/16-Bit | $6.71 |
KSZ8862 | 10Base-T/100Base-TX/FX | 8-/16-Bit | $10.82 |
KSZ8863 | 10Base-T/100Base-TX/FX | MII/RMII | $2.65 |
KSZ8864 | 10Base-T/100Base-TX | MII/RMII | $3.61 |
KSZ8873 | 10Base-T/100Base-TX/FX | MII(2)/RMII | $2.98 |
KSZ8893 | 10Base-T/100Base-TX/FX | MII/RMII | $5.57 |
KSZ8895 | 10Base-T/100Base-TX/FX | MII/RMII | $3.09 |
KSZ8993 | 10Base-T/100Base-TX/FX | MII/RMII | $3.92 |
KSZ8995 | 10Base-T/100Base-TX/FX | MII/RMII | $4.28 |
KSZ8997 | 10Base-T/100Base-TX | 10Base-T/100Base-TX | $11.13 |
KSZ8999 | 10Base-T/100Base-TX/FX | MII | $11.77 |
LAN9303 | 10Base-T/ 100Base-TX | MII/RMII/Turbo MII | $3.97 |
LAN9303M | 10Base-T/ 100Base-TX | MII/RMII/Turbo MII | $4.82 |
LAN9311 | 10Base-T/ 100Base-TX | 16 bit Host Bus | $7.36 |
LAN9312 | 10Base-T/ 100Base-TX | 32 bit Host Bus | $8.40 |
LAN9313 | 10Base-T/ 100Base-TX | MII | $6.50 |
LAN9352 | 10Base-T/ 100Base-TX | HBI SPI/SQI | $6.75 |
LAN9353 | 10Base-T/ 100Base-TX | MII/RMII/Turbo MII | $3.64 |
LAN9354 | 10Base-T/ 100Base-TX | RMII | $3.41 |
LAN9355 | 10Base-T/ 100Base-TX | MII/RMII/Turbo MII | $4.20 |
器件无铅环保信息
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|
KSZ8862-32MQL-FX | 1.761500 | 4.015152 | 128 | PQFP | 14x20x2.72mm | Matte Tin | e3 | | |
KSZ8862-16MQL | 1.761500 | 4.015152 | 128 | PQFP | 14x20x2.72mm | Matte Tin | e3 | | |
KSZ8862-16MQL-FX | 1.761500 | 4.015152 | 128 | PQFP | 14x20x2.72mm | Matte Tin | e3 | | |
KSZ8862-32MQL | 1.761500 | 4.015152 | 128 | PQFP | 14x20x2.72mm | Matte Tin | e3 | | |