产品特性- Up to 12 MIPS Performance
- C compiler optimized RISC architecture
- 8x8 Single Cycle Hardware Multiply
- Internal oscillator support-31 kHz to 8MHz
- Voltage range; 2.0V to 3.6V
- An integrated LCD driver module, capable of driving 48 segments and 4 commons for LCD display (132 pixels)
- Integrated LCD Voltage Boost Regulator
- Run, Idle and down to 0.1uA SLEEP modes
- 12-bit ADC, 12 channels, 100K samples per second
- Low Voltage Detection Module
- Brown-out-Reset Module
- Two Analog Comparators
- Master Synchronous Serial Port supports SPI™ and I2C™ master and slave mode
- EUSART module including LIN bus support
- Four Timer Modules
- Two CCP
- Real-Time Clock Calendard
- Charge Time Measurement Unit (CTMU) for capacitive touch
- Demo & Eval Boards
- Emulation & Debuggers
- Programmers
- PICDEM LCD 2 DEMO BOARD ( DM163030 )
The PICDEM LCD 2 Demonstration Board (DM163030) shows the main features of Microchip’s 28, 40, 64 and 80-pin LCD Flash PIC microcontrollers including the LCD voltage booster and contrast controller. It is populated with the PIC18F87J90. Other devices are supported via a transition socket and are available separately. A sample LCD glass display is included for custom prototyping. The glass...
- PIC18F87J90 PIM (for PICDEM LCD 2) ( MA180025 )
Processor Plug-In Modules are small circuit boards to be used with the various Microchip Development Boards to evaluate various MCU families. These plug into the main processor socket of the Development Boards so that different microcontrollers can be used for prototyping, demonstration or development --quickly and easily.
This processor PIM includes a 80-pin PIC18F87J90 MCU...
- Explorer 8 Development Kit ( DM160228 )
Summary
The Explorer 8 Development Kit is a full-featured development board and platform for 8-bit PIC® microcontrollers. This kit is a versatile development solution, featuring several options for external sensors, off-board communication and human interface. Additionally, it offers ample room for expansion, making it an excellent solution for developers and engineers looking for a...
- PICkit 3 In-Circuit Debugger ( PG164130 )
Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:
Low cost
Minimum of additional hardware needed for debug
Expensive sockets or adapters are not required...
Debug Features:
Stop watch:TrueBreak on stack overflow:TruePgm-memory HW breakpoints:3Data-memory breakpoints:3WDT overflow:TruePass counter:True
- Low cost
- Minimum of additional hardware needed for debug
- Expensive sockets or adapters are not required...
- MPLAB ICD 3 In-Circuit Debugger ( DV164035 )
MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).
Debug Features:
WDT overflow:TrueData-memory breakpoints:3Pgm-memory SW breakpoints:UnlimitedPass counter:TrueBreak on stack overflow:TrueStop watch:TruePgm-memory HW breakpoints:3
- MPLAB REAL ICE PROBE KIT ( DV244005 )
MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for Microchip Flash DSC® and MCU devices. It debugs and programs PIC® and dsPIC® Flash microcontrollers with the easy-to-use but powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit.
The MPLAB REAL ICE probe is connected...
Debug Features:
Pgm-memory HW breakpoints:3Native Trace:TrueBreak on stack overflow:TrueI/O Port Trace:True (Requires Compiler Support)Runtime watch:SupportedWDT overflow:TrueStop watch:TrueSPI Trace:True (Requires Compiler Support)Data-memory breakpoints:3Data capture:EnabledPgm-memory SW breakpoints:UnlimitedPass counter:True
Accessories: AC244008
- MPLAB PM3 Universal Device Programmer ( DV007004 )
The MPLAB® PM3 Universal Device Programmer is easy to use and operates with a PC or as a stand-alone unit, and programs Microchip's entire line of PIC® devices as well as the latest dsPIC® DSC devices. When used standalone, data can be loaded and saved with the SD/MMC card (not included).
Socket: AC164327
PartNo: PIC18F67J90 (64PT)
- Socket: AC164327
PartNo: PIC18F67J90 (64PT)
- MPLAB ICD 3 In-Circuit Debugger ( DV164035 )
MPLAB® ICD 3 In-Circuit Debugger System is Microchip's most cost effective high-speed hardware debugger/programmer for Microchip Flash Digital Signal Controller (DSC) and microcontroller (MCU) devices. It debugs and programs PIC® Flash microcontrollers and dsPIC® DSCs with the powerful, yet easy-to-use graphical user interface of MPLAB Integrated Development Environment (IDE).
- PICkit 3 In-Circuit Debugger ( PG164130 )
Microchip’s PICkit™ 3 In-Circuit Debugger/Programmer uses in-circuit debugging logic incorporated into each chip with Flash memory to provide a low-cost hardware debugger and programmer. In-circuit debugging offers these benefits:
Low cost
Minimum of additional hardware needed for debug
Expensive sockets or adapters are not required...
- Low cost
- Minimum of additional hardware needed for debug
- Expensive sockets or adapters are not required...
- MPLAB REAL ICE PROBE KIT ( DV244005 )
MPLAB REAL ICE In-Circuit Emulator System is Microchip’s next generation high speed emulator for Microchip Flash DSC® and MCU devices. It debugs and programs PIC® and dsPIC® Flash microcontrollers with the easy-to-use but powerful graphical user interface of the MPLAB Integrated Development Environment (IDE), included with each kit.
The MPLAB REAL ICE probe is connected...
- 主页
| |
