SST25WF040B
SST25WF040B is a member of the Serial Flash 25 Series family and feature a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SPI serial flash memory is manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.
This Serial Flash significantly improve performance and reliability, while lowering power consumption. The device writes (Program or Erase) with a single power supply of 1.65-1.95V. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.
产品特性- Single Voltage Read and Write Operations - 1.65-1.95V
- Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
- High Speed Clock Frequency up to 40MHz
- Dual Input/Output Support - Fast-Read Dual-Output Instruction (3BH) - Fast-Read Dual I/O Instruction (BBH)
- Superior Reliability - Endurance: 100,000 Cycles - Greater than 20 years Data Retention
- Ultra-Low Power Consumption: - Active Read Current: 4 mA (typical) - Standby Current: 10 μA (typical) - Power-down Mode Standby Current: 4 μA (typical)
- Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 64 KByte overlay blocks
- Page Program Mode up to 256 Bytes/Page
- Fast Erase and Page-Program: - Chip-Erase Time: 400 ms (typical) - Sector-Erase Time: 40 ms (typical) - Block-Erase Time: 80 ms (typical) - Page-Program Time: 0.8 ms/ 256 bytes (typical)
- End-of-Write Detection with Software polling the BUSY bit in Status Register
- Hold Pin (HOLD#) to Suspend a serial sequence without deselecting the device
- Write Protection Pin (WP#) - Enables/Disables the Lock-Down function of the status register
- Software Write Protection- Write protection through Block-Protection bits in status register
- Temperature Range: -40°C to +85°C
- Packages Available - 8-lead SOIC (150 mils) - 8-contact USON (2mm x 3mm)
- All devices are RoHS compliant
| 技术参数
Parameter Name
Value
| Value |
Density
4 Mbit
|
4 Mbit
|
Op. Volt Range (V)
1.65 to 1.95
|
1.65 to 1.95
|
Max. Clock Freq.
40 MHz
|
40 MHz
|
Page Size (bytes)
256
|
256
|
Temp Range (°C)
-40°C to +85°C
|
-40°C to +85°C
|
Endurance
100,000
|
100,000
|
Data Retention (Years)
20
|
20
|
Bus Modes
SPI,SDI
|
SPI,SDI
|
|
文档资料
订购型号
Part Number | Leads | Package Type | Temp Range | Packing | 1+ | 26+ | 100+ | 1000+ | 5000+ |
---|
SST25WF040B-40I/SN | 8 | SOIC | -40C to +85C | TUBE | 0.76 | 0.73 | 0.70 | 0.67 | 0.63 |
SST25WF040BT-40I/CS | 9 | WLCSP | -40C to +85C | T/R | 1.00 | 0.97 | 0.93 | 0.88 | 0.83 |
SST25WF040BT-40I/NP | 8 | USON | -40C to +85C | T/R | 0.94 | 0.91 | 0.87 | 0.82 | 0.78 |
SST25WF040BT-40I/SN | 8 | SOIC | -40C to +85C | T/R | 0.82 | 0.79 | 0.76 | 0.72 | 0.68 |
相类似产品
Product | Memory Size | Memory Speed | Package | Price5K |
---|
SST25PF040C | 4 Mbit | 40 MHz | SOIC 150mil-8, TDFN-S-8 | $0.59 |
SST25VF040B | 4000K | 50 MHz | CSP-8, SOIC 150mil-8, SOIC-8, SOIJ-8, TDFN-S-8 | $0.66 |
SST25WF040B | 4 Mbit | 40 MHz | SOIC 150mil-8, USON-8, WLCSP-9 | $0.63 |
SST26WF040B | 4Mb | 104 MHz | CSP-8, SOIC 150mil-8, TDFN-S-8, USON-8 | $0.61 |
SST26WF040BA | | 104 MHz | SOIC 150mil-8, TDFN-S-8, USON-8 | $0.64 |
器件无铅环保信息
PartNumber | DeviceWeight | ShippingWeight | LeadCount | PackageType | PackageWidth | SolderComposition | JEDECIndicator | RoHS | ChinaEFUP |
---|
SST25WF040BT-40I/SN | 0.078000 | 0.230303 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
SST25WF040B-40I/SN | 0.078000 | 0.160000 | 8 | SOIC | .150In(3.90mm) | Matte Tin | e3 | | |
SST25WF040BT-40I/NP | 0.012500 | 0.031333 | 8 | USON | 2x3x0.6mm | Matte Tin | e3 | | |
SST25WF040BT-40I/CS | | 0.064667 | 9 | WLCSP | Varies | SAC | e1 | | |