SST26WF080B

The SST26WF080B/080BA Serial Quad I/O (SQI) flash device utilizes a 4-bit multiplexed I/O serial interface to boost performance while maintaining the compact form factor of standard serial flash devices. SST26WF080B/080BA also supports full command-set compatibility to traditional Serial Peripheral Interface (SPI) protocol. Operating at frequencies reaching 104 MHz, the SST26WF080B/080BA enables minimum latency execute-in-place (XIP) capability without the need for code shadowing on an SRAM. The SST26WF080B/080BA writes (Program or Erase) with a single power supply of 1.65-1.95V and significantly lower power consumption. The device’s low power consumption makes it the ideal choice for Mobile handset, Bluetooth, GPS, camera module, table, hearing aid and any battery powered devices. Further benefits are achieved with SST’s proprietary, high-performance CMOS SuperFlash® technology, which significantly improves performance and reliability.

The SST26WF080B default at power up is with WP# and HOLD pins enable and SIO2 and SIO3 pins disable allowing for SPI protocol operations without register configuration.
The SST26WF080BA default at power up is with WP# and HOLD pins disable and SIO2 and SIO3 pins enable allowing for Quad I/O operations without register configuration.

产品特性
  • Serial Interface Architecture: Nibble-wide multiplexed I/O’s with SPI-like serial command structure
  • Mode 0 and Mode 3
  • x1/x2/x4 Serial Peripheral Interface (SPI) Protocol -Burst Modes
  • Continuous linear burst, 8/16/32/64 Byte linear burst with wrap-around
  • Page-Program: 256 Bytes per page in x1 or x4 mode
  • Flexible Erase Capability: Uniform 4 KByte sectors, Four 8 KByte top and bottom parameter overlay blocks, One 32 KByte top and bottom overlay block, Uniform 64 KByte overlay blocks
  • Software Write Protection: Individual Block-Locking: 64 KByte blocks, two 32 KByte blocks, and eight 8 KByte parameter blocks
  • Low Power Consumption: Active Read current: 15 mA (typical at 104 MHz), Standby Current: 10 µA (typical)
  • SFDP (Serial Flash Discoverable Parameters)
  • Packages Available: 8-contact WSON (6mm x 5mm), 8-lead SOIC (150 mil), 8-contact USON (2mm x 3mm), 8-ball XFBGA (Z-Scale)
  • All devices are RoHS compliant
技术参数
Parameter Name Value Value
Density 8 Mbit 8 Mbit
Op. Volt Range (V) 1.65 to 1.95 1.65 to 1.95
Max. Clock Freq. 104 MHz 104 MHz
Page Size (bytes) 256 256
Write Protect Full Array Full Array
Temp Range (°C) -40°C to +85°C -40°C to +85°C
Endurance 100,000 100,000
Data Retention (Years) 100 100
Bus Modes SPI,SDI,SQI SPI,SDI,SQI
文档资料
1.8V 4 Mbit and 8 Mbit Serial Quad I/O (SQI) Flash MemoryData Sheets10/15/2014688KB
Memory Products BrochureBrochures02/05/20154696KB
SST26WF080B Software DriverSoftware04/02/2015117KB
IBIS Model - SST26WF080B DeviceIBIS04/02/201511KB
Corporate Product Selector GuideProduct Line Card04/13/201610173KB
SST26WF080BSilicon Product10/17/20140B
订购型号
Part NumberLeadsPackage TypeTemp RangePacking1+26+100+1000+5000+
SST26WF080B-104I/MF8TDFN-S-40C to +85CTUBE0.950.920.880.830.78
SST26WF080B-104I/SN8SOIC-40C to +85CTUBE0.840.810.780.740.69
SST26WF080BAT-104I/CS8CSP-40C to +85CT/R1.121.081.040.980.92
SST26WF080BT-104I/CS8CSP-40C to +85CT/R1.121.081.040.980.92
SST26WF080BT-104I/MF8TDFN-S-40C to +85CT/R0.990.960.920.870.82
SST26WF080BT-104I/NP8USON-40C to +85CT/R1.081.041.000.950.89
SST26WF080BT-104I/SN8SOIC-40C to +85CT/R0.880.850.810.770.73
相类似产品
ProductMemory SizeMemory SpeedPackagePrice5K
SST25VF080B8000K50 MHzCSP-16, PDIP-8, SOIC 150mil-8, SOIJ-8, TDFN-S-8$0.68
SST25WF080B8 Mbit40 MHzSOIC 150mil-8, USON-8, WLCSP-9$0.75
SST26WF080B8Mb104 MHzCSP-8, SOIC 150mil-8, TDFN-S-8, USON-8$0.69
SST26WF080BA104 MHzSOIC 150mil-8, TDFN-S-8, USON-8$0.73
SST49LF008A33 MHzPLCC-32, TSOP-32, TSOP-40$2.95
SST49LF080A33 MHzPLCC-32, TSOP-32$3.32
器件无铅环保信息
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
SST26WF080B-104I/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
SST26WF080BAT-104I/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
SST26WF080BT-104I/SN0.0780000.2303038SOIC.150In(3.90mm)Matte Tine3
SST26WF080BA-104I/SN0.0780000.1600008SOIC.150In(3.90mm)Matte Tine3
SST26WF080B-104I/MF0.0738000.1632658TDFN-S6x5x0.8mmMatte Tine3
SST26WF080BA-104I/MF0.0738000.1632658TDFN-S6x5x0.8mmMatte Tine3
SST26WF080BT-104I/MF0.0738000.2000008TDFN-S6x5x0.8mmMatte Tine3
SST26WF080BAT-104I/MF0.0738000.2000008TDFN-S6x5x0.8mmMatte Tine3
SST26WF080BT-104I/NP0.0125000.0313338USON2x3x0.6mmMatte Tine3
SST26WF080BAT-104I/NP0.0125000.0313338USON2x3x0.6mmMatte Tine3
SST26WF080BT-104I/CS0.0050000.0503338CSPVariesSACe1
SST26WF080BAT-104I/CS0.0050000.0503338CSPVariesSACe1
1.8V 4 Mbit and 8 Mbit Serial Quad I/O (SQI) Flash Memory SST26WF080BA
Memory Products Brochure SST49LF080A
SST26WF080B Software Driver SST26WF080BA
IBIS Model - SST26WF080B Device SST26WF080BA
Corporate Product Selector Guide SST49LF080A