UCS81001

  The UCS81001 provides a USB port power switch for precise control of up to 2.5 amperes continuous current with over-current limit (OCL), dynamic thermal management, latch or auto-recovery (low test current) fault handling, selectable active low or high enable, under- and over-voltage lockout, back-drive protection, and backvoltage protection.
  Split supply support for VS and VDD is an option for low power in system standby states. This gives battery operated applications, like onboard computers, the ability to detect attachments from a sleep or off state. After the Attach Detection is flagged, the system can decide to wake up and/or provide charging.
  In addition to power switching and current limiting modes, the UCS81001 will automatically charge a wide variety of portable devices, including USB-IF BC1.2, YD/T-1591 (2009), most Apple® and RIM®, and many others. Nine preloaded charger emulation profiles maximize compatibility coverage of peripheral devices. As well, a customizable charger emulation profile is available to accommodate unique existing and future portable device handshaking / signature requirements.
  The UCS81001 also provides current monitoring to allow intelligent management of system power and charge rationing for controlled delivery of current regardless of the host power state. This is especially important for battery operated applications that want to provide power and do not want to drain the battery excessively.
  The UCS81001 is available in a 28-pin QFN 5 mm x 5 mm package.

产品特性
  • Port power switch with two current limit behaviors 2.9 V to 5.5 V source voltage range Up to 2.5 A current with 55 mΩ On Resistance Over-current trip or constant current limiting Soft turn-on circuitry Programmable current limit Dynamic thermal management Under- and over-voltage lockout Back-drive, back-voltage protection Latch or auto-recovery (low test current) fault handling Selectable active high or low power switch enable BC1.2 VBUS discharge port renegotiation function
  • 2.9 V to 5.5 V source voltage range
  • Up to 2.5 A current with 55 mΩ On Resistance
  • Over-current trip or constant current limiting
  • Soft turn-on circuitry
  • Programmable current limit
  • Dynamic thermal management
  • Under- and over-voltage lockout
  • Back-drive, back-voltage protection
  • Latch or auto-recovery (low test current) fault handling
  • Selectable active high or low power switch enable
  • BC1.2 VBUS discharge port renegotiation function
  • Selectable / automatic cycling of USB data line charger emulation profiles Employs unique method and system for sampling multiple profiles1 USB-IF BC1.2 charging downstream port (CDP) & dedicated charging port (DCP) modes, YD/T-1591, and most Apple and RIM protocols standard; others as defined via the SMBus 2.0 / I2C® protocol USB 2.0 compliant high-speed data switch (in Data Pass-through, SDP, and CDP modes) Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices One custom programmable charger emulation profile for portable device support for fully host controlled charger emulation
  • Employs unique method and system for sampling multiple profiles1
  • USB-IF BC1.2 charging downstream port (CDP) & dedicated charging port (DCP) modes, YD/T-1591, and most Apple and RIM protocols standard; others as defined via the SMBus 2.0 / I2C® protocol
  • USB 2.0 compliant high-speed data switch (in Data Pass-through, SDP, and CDP modes)
  • Nine preloaded charger emulation profiles for maximum compatibility coverage of peripheral devices
  • One custom programmable charger emulation profile for portable device support for fully host controlled charger emulation
  • Self-contained current monitoring and rationing for power allocation applications
  • Low power Attach Detection and open-drain A_DET# pin
  • Ultra low power Sleep state
  • Optional split supply support for VBUS and VDD for low power in system standby states
  • Wake on Attach USB
  • SMBus 2.0 / I2C communications Supports Block Write and Read Multiple SMBus addresses
  • Supports Block Write and Read
  • Multiple SMBus addresses
  • Wide operating temperature range: -40 °C to +85 °C
技术参数
Parameter Name Value Value
Description Automotive USB Port Power Controller with Charger Emulation Automotive USB Port Power Controller with Charger Emulation
Hi-Speed USB 2.0 Switch 1 1
USB Port Power Switch 1 1
Battery Charger Emulation Profiles 10 10
8 Resistor Set Current Limits up to 2.5A up to 2.5A
Power Allocation yes yes
Attach Detection Output yes yes
Interface I2C /SMBus I2C /SMBus
Current Measurement yes yes
文档资料
Automotive USB Port Power Controller with Charger EmulationData Sheets01/10/20141635KB
TB3135 - Recommendations for Connecting UCSX100X Devices to Power SuppliesAppNote04/24/201569KB
相类似产品
ProductBattery Charger Emulation ProfilesCharging Indicator OutputAttach Detection OutputPrice5K
UCS1001-19yes$0.90
UCS1001-29yes$0.90
UCS1001-39yes$0.90
UCS1001-49yes$0.90
UCS1002-110yes$1.29
UCS1002-210yes$1.29
UCS100310yesyes
UCS1003-110yesyes$1.29
UCS21120yes$1.80
UCS8100110yes
UCS8100210yes
UCS8100310yes$1.72
器件无铅环保信息
PartNumberDeviceWeightShippingWeightLeadCountPackageTypePackageWidthSolderCompositionJEDECIndicatorRoHSChinaEFUP
UCS81001AMR-C1A0.0661000.14200028VQFN5x5x0.9mmMatte Tine3
UCS81001AM-C1A0.0661000.74081628VQFN5x5x0.9mmMatte Tine3
UCS81001AM-C1A-V010.0661000.74081628VQFN5x5x0.9mmMatte Tine3
UCS81001AMR-C1A-V010.0661000.14200028VQFN5x5x0.9mmMatte Tine3
Automotive USB Port Power Controller with Charger Emulation UCS81002
TB3135 UCS81003